>When is it time to throw away or burn small pieces of wood. I've been cleaning my shop all day long and have boxes and boxes of small pieces. Besides turning, I also build cabinets and have a lot of oak and maple pieces. You can only turn so many pens or bottle stoppers.
>If there is a club in your area,I hope you belong, maybe they could use for a kids turning day. Or someone near you who is jhust getting started turning and would love to have "scrap wood" to practice on.
>I usually have three boxes of scrap. Long pieces that I have a hope of using and two of short cut-offs and "garbage".
When the third box gets full, I take the two boxes of shorts to someone who uses wood to heat (winter) or someone who boils peanuts at a roadside stand (spring, summer and part of fall).
I make hundreds of finger tops for local kids and to send to orphanages from as small as .75" square up to 1.5" square stock 2-6" long. 4/4 stock 11" long or so makes great magic wands. Another great application for 5/4 to 8/4 squares is to make little weed pots. Around Mother's day I make a bunch and have kindergarten kids "sand" them and decorate with little springs of artificial flowers after I spray on some quick-drying lacquer. You could easily go through several hundred of these at a local school or church (if you have the time!)
If the scraps are big enough, you might consider putting some on the benefit auction here. There's a box there at the moment.
>Even the stuff that I can't think of a use for, someone else can. All my small exotic scraps go to a jewelry maker friend of my wife's. It's like Christmas day to her. For me, one less full bin.
Steven
P.S. I have the same offcut pile from flat work, and I keep on saying that I'll do segmented work someday...
>room to keep all the scrap wood I have. I burn it in my shop stove during the winter, and refill the 40"x40" scrap box every spring and summer. Right now, I have just one small box of scrap wood that I've saved to use sometime or other for something.
I can't find room to store it for any length of time.
>Those scraps will make small segmented turnings. Cut them on the bandsaw and run through jigs on a disc sander. I have a model saw, model disc sander and model drum sander just for these little guys. For me it's like gold waiting to be mined.