Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

More Plumwood

Posts

More Plumwood

#1

More Plumwood

charlie belden

>Two more plumwood pieces from a neighbors tree pruning. Was on a droplet shaped rakuesque trip and did three basic variations of the same form with different proportions. The first turning was close, but not quite.

Then I stumbled on the Squeezed shape by accident. Doing the final shaping with a 1/2" curved edge skew I had to finish the roll before I got to where I wanted the curve to end. So I had a pretty deep cut 1/2" ABOVE where I wanted the bead for the foot of the piece. Rather than scale everything down to recover from the OOOOOPS I decided to go for a drop in a cup shape. And that led to doing a cap and more of a squeezed sphere look. Wanted a semi-pinched neck separate from the "cap", as if it was coming through a tight hole in the cap.

This Squeezed thing has some interesting possibilities. Presents some interesting "challenges" to work out - getting the illusion of three or four separate parts that fit together and getting the shapes to compliment each other. But the idea of making wood appear squeezable like a balloon . . .


img

Re: More Plumwood

#2

Re: More Plumwood

Mark Paulley

>Charlie,

I really like these. I like the one on the right the most but that is not slamming the other either. The sqeezed shape really adds some characther.

Thanks

Mark

Re: More Plumwood

#3

Re: More Plumwood

Ralph

>Makes me want to do something with the (entire) plumwood tree I have cut and waiting (12+inches in diameter)

Re: More Plumwood

#4

Re: More Plumwood

Allen Neighbors

>Charlie, I like both of these. I like the one on the right the most. I also like SW forms of all types, and these are pleasing to the eye. You've used the wood to such a degree that they appear to have a darker glazee dripped aroung the tops and bottomes. Well done!

Re: More Plumwood

#5

Re: More Plumwood

charlie belden

>Still haven't got the truncated tear drop form quite right but am closing in on it. Getting the right combination of the three curves is not quite as easy as it seems.

On the "squeezed" piece, am still trying to decide if it's gimmicky or a combination of shapes that's worth exploring. It has a Chinese look to it - all pieces of spheres as opposed to the more Japanese .less constrained. ambiguous. blending of ovals.

The "squeezed" piece would probably work better if ALL the visible wood was one color, or the "cup" and "cap" in one color and the "sphere" and "neck" in a different color. That could be done by turning four separate pieces then assembling them - but that seems like too much work.

Need to make a light box for better photos - using a flash when you have to get this close is too unpredictable and proned to distracting hot spots in the image.

Because the plum wood pieces are from cut branches, they all have the pith in them. Pith, for reasons I'm still trying to figure out, is a "crack generator", either from the pith outward or from outside towards the pith. Don't know why the pith seems to do that but I'm trying a few things to try and avoid the pith propogated cracking.

Right from the start I put some thin CA glue on the pith at what will be the bottom of the piece, let it soak in and apply some more. After I've got the piece done and parted off I drill out the pith plus some adjacent wood, then epoxy a turned dowel out of the same wood or a dry piece of wood into the hole. After trimmnig off the excess "plug" I put a coat of thin CA glue on the bottom (end grain), put a coat of carnuba applied with a buffing wheel on the outside and slosh a little Mahoney's Walnut Oil on the inside.

The pieces I did a few weeks ago got this treatment and they've been in the house since then - with no cracking - yet.

Sure are a lot of subtle things about woodturning that don't come up with flat work.

Re: More Plumwood

#6

Re: More Plumwood

charlie belden

>The "looks like dripping glaze" is actually the common newbie mistake - go for the Biggest rather than for the Best form for the piece of wood. Plum's heartwood has reds and purples and orange in it, but it's seldom symetric about the pith. By going BIggest the piece only shows the heartwood at the top and neck and a little near the base. Had I made the piece smaller I could have had better than half the surface area heartwood.

But I do like the "dripping glaze" thing - the shape of the piece reminiscent of a raku fired pinch neck pot. So many "classic shapes" for woodturning are wooden versions of ceramic pieces that would be a LOT easier to through than to turn. But no glaze I've seen can come close to the wonderous grain of some woods.

With all the carving and texturing and piercing and patinaing going on it's fun to try a form like this - with nowhere to hide a blown cut or an interuption to the flow of the curves.