Big Burl
Dick Hines
>With the help form my Woodcentral friends I am able to post pictures again.
Here is the big burl 16" X 16". I am planning to turn "One Big" hollow form.
Knowledge You Can Build On — Est. 1998
Big Burl
Dick Hines
>With the help form my Woodcentral friends I am able to post pictures again.
Here is the big burl 16" X 16". I am planning to turn "One Big" hollow form.
Re: Big Burl
Barry Irby
>Dick, That's a nice burl. But I have my eye on one that is many times that size. I have not measured it, but it is bout six feet in diameter and about eight feet tall. I talked tot he owner and I can go get it. Just need a dump truck and a crane.
Last week I saw on on the side of Rt. 10 that is probably four feet by four feet. Its in somebody's yard. If you have a really quiet chainsaw maybe we can sneak up on it.
There are several more. Actually, I am not aware of ever seeing one until I started turning. Now I see them all over the place. I bet I can find fifty. Just don't know how to get them.
That's a beauty you have. Most probably, the center of it is not burl wood. Just the parts that are beyond the trunk. Can't tell for sure until you cut it. Might consider making one really large hollow form out of it, just as it sits.
Re: Big Burl
Dick Hines
>Barry, because I don't know what the inside will look like at the trunk is the reasion I am going to do a hollow form
Just drill a hole in the top and call it.....
Barry Irby
>a natural edge weed pot.
Re: Big Burl
Brian Hahn in SW Wisconsin
>That's a nice chunk of cherry!
Have fun and good luck with it.
Re: Big Burl *LINK*
Darrell Feltmate
>Are these not fun? I have a 10" spruce burl I am working on over at the web site. A neighbor gave me about 20 of them and one of the guys at the local mill said he had another 20 or thirty, mostly spruce but some maple too. There might be some ideas from what I am doing and probably starting better ones than mine. have fun :-)
Work in Progress - Spruce Burl
Re: Big Burl
Jim Terry
>Dick, That looks like a really nice burl. Be sure to post a picture when you get it turned. Cherry can produce some very nice burls. I just finished a 15 inch bowl from one. Good luck with it. Jim
Re: Big Burl
georgetroy
>Nice burl, why turn all that beautiful bark off, just drill a hole in the top and call it an artistic vase. Of course it might be just a little bit heavy. Taking photos with your new Panny?
A 6' x 8' cherry burl????
Carole Valentine
>You ARE playing a game with Dick aren't you?
Re: Big Burl
Mark Williamson
>DUDE! That is awesome! I can't wait to see what emerges from that!
Mark
Thanks Darrell
keith zimmerman, Normal IL
>Thanks for posting this link. I have a round burl similar to what you show and have been struggling with how to handle it. I like your approach and thought process. I may have to borrow some of your ideas when I tackle mine.
keithz
Just hollow it!
Mike Schwing from Md.
>If you could just hollow it out, and retain the bark except for the very tip of the collar and perhaps just at the bottom, that would be the most unique hollow form I've ever seen.
Re: A 6' x 8' cherry burl????
Barry Irby
>Those are not cherry burls. The truly huge one is oak, I think. Don't know what the other are. Been eyeballing one on public property for about ten years. It used to be the size of a basket ball. now its bigger than a beach ball. Then there is the one on the side of the Interstate. The whole base of a tree. and the one out in the county, a maple tree completely consumed in burls. Thought about buying the house to get the tree.
The amazing part to me is that I never noticed them until I started turning, now I see them everywhere.
They widened Chippenham Parkway afew years ago. They took out a cherry that was covered in burls. I found the Foreman and asked if I could cut them out and he looked at me like I might be crazy. I went home and got a small bowl I had turned out of burl and told him I would make him another if he gave me the wood. He had his men cut them out and lay them beside the road. Then he had the Cop stand guard while I loaded them. It took two trips in my CRV. Nice haul.
What shape are you gonna make? :-)
steve antonucci
>Seems like that it's alreay baked in? Might want to debark it first to see what you're starting with and make a decision from there...
Steven
Re: What shape are you gonna make? :-)
Dick Hines
>The burl already has a basic shape. It just need a little refineing. I figure it will take me 2 days to turn to compleation.