Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

3 Phase Motor / controller

Posts

3 Phase Motor / controller

#1

3 Phase Motor / controller

Stuart Johnson

>I upgraded my Nova 3K to 2hp VS AC with a controller. This works great and I'm not having any problems. But, is it possible to run two different motors using the same controller?

Laquna has a nice looking 2HP 20" disc sander for $795 as compared to Powermatic at $2000 and Woodtec at $1400. The problem is the Laguna is 3 phase. This got me to thinking about the possibility of using the same controller to handle both machines. I can't think of anytime when I would want to run them at the same time.

Re: 3 Phase Motor / controller

#2

Sure...

Peter Teubel

>The easiest way would be to wire a pigtail to the controller and plug in the device you want to use (lathe or sander). You could also use a switch, but that might be a little more involved (triple pole, triple throw).

Re: 3 Phase Motor / controller

#3

Re: 3 Phase Motor / controller

Don Evans

>It may be possible with a drum switch but it depends on the controller and wire length could also be come problematic.

Have you considered making the Nova a disk sander also? It would be much easier and cheaper to do that.

I made a table that fits in banjo, use a morse taper adapter with drawbar to mount the sanding disk. Works great for my needs but your purposes may be more demanding.

Don

Re: 3 Phase Motor / controller

#4

Re: 3 Phase Motor / controller

john lucas

>I rigged this up for one of my friends. We simply put a plug on the end and he plugs it into the machine needed. The thought was that he would never use these two machines at the same time..

Re: 3 Phase Motor / controller

#5

Re: 3 Phase Motor / controller

Paul Waddle

>I bought one last yr off ebay thinking I could use it on single phase. I've got 20$ in it if you should feel the need. I think the postage will be less than 10$. For specs let me know its a nice heavy duty. My problem is, it has a sensor,if you don't have 3phase imput,it won't stay on. pw

Re: 3 Phase Motor / controller

#6

Re: 3 Phase Motor / controller Thanks

Stuart Johnson

>I the plug sounds like the way to go. It does look like 3 phase plugs are rather pricey. Now to convince myself I really need the larger sander plus find someplace to do a little hands on look see.