Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Bubba and the Twisted Sisters II

Posts

Bubba and the Twisted Sisters II

#1

Bubba and the Twisted Sisters II

Brian Hahn in SW Wisconsin

>Walnut bud vases. The sisters are 3" x 5-1/2" with a 60� left and right twist. Bubba is 3-1/2" x 7". They all are turned on 4 centers and drilled to accept test tube inserts.

I started playing with this concept two years ago and made these last spring. The first version of this set has been consigned to the burn barrel. The next version is in the works, but I'm still struggling with the shape of Bubba.

The picture is a little over-exposed because that shows the shape the best and I couldn't get a decent picture of the butternut, cherry or elm sets.

Comments and critiques welcome.


img

Re: Bubba and the Twisted Sisters II

#2

Re: Bubba and the Twisted Sisters II

Barry Irby

>Look great to me. I have not done any multi-axis turning, but Barbara Dill that wrote the article on it in the AAW mag is in my local club and did a demo on it for us. She wowed us.

Wonder if you could make these "multi purpose" and let them be both bud vases and candlesticks?

Re: Bubba and the Twisted Sisters II

#3

Steven Antonucci

I think I like them too.

steve antonucci

>Like Barry, I'd rather see them as candlesticks than budvases.

Cool stuff.

Steve

Re: Bubba and the Twisted Sisters II

#4

Definitely could.

Brian Hahn in SW Wisconsin

>These could just as easily be candle holders. That was one of my original plans, but I needed bud vases and didn't need any more candle holders. :=))

Re: Bubba and the Twisted Sisters II

#5

Re: Bubba and the Twisted Sisters II

John K Jordan

>I love the shapes (and the wood). Would make classy salt shakers as well.

JKJ

Re: Bubba and the Twisted Sisters II

#6

Re: Bubba and the Twisted Sisters II

Clay Foster

>Nice work, Brian. Multiple axis work has a lot of visual interest, especially the lines created by the intersection of curved planes.

Re: Bubba and the Twisted Sisters II

#7

Re: Bubba and the Twisted Sisters II

Brian Hahn in SW Wisconsin

>Thanks Clay.

The next version has a lot more visual interest in the "Sisters" and is rather subtle in "Bubba".

Re: Bubba and the Twisted Sisters II

#8

Re: Bubba and the Twisted Sisters II

Brian Hahn in SW Wisconsin

>Classy and expensive shakers!

The form is simple, but making it isn't, especially the twisted ones. I've done a fair number of these and it still takes a couple of hours to make each one.

Re: Bubba and the Twisted Sisters II

#9

Re: Bubba and the Twisted Sisters II

John K Jordan

>>...Classy and expensive shakers!

I don't have much experience with selling turnings, but if people will buy $40 magic wands by the handful, I suspect some would pay hundreds of dollars for some wonderfully unique salt shakers!

Hey, how about a hint as to how you do the twisted? Does it result from shifting the centers so they are on a plane at some angle from the plane of the previous off-axis mounting?

JKJ

Re: Bubba and the Twisted Sisters II

#10

Re: Bubba and the Twisted Sisters II

Brian Hahn in SW Wisconsin

>The twist is from rotating the centers. In this case the top centers are rotated 60� left or right relative to the bottom center points.

Here's a diagram from a demo I did in December.


img