Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Fog, Texas size gouge

Posts

Fog, Texas size gouge

#1

Fog, Texas size gouge

Doug Thompson near Cleveland

>It's not done yet but this will be sent for the raffle... it just might work LoL Another one was made that I'll keep for a paper weight untill a 5 HP lathe is purchased.


img

Re: Fog, Texas size gouge

#2

Re: Fog, Texas size gouge 

Doug Thompson near Cleveland

>


img

Re: Fog, Texas size gouge

#3

Re: Fog, Texas size gouge

Bill Neddow

>Doug, this looks like it must be at least an inch in diameter. Is it, or is it 3/4"?

Re: Fog, Texas size gouge

#4

Steven Antonucci

That's not a knife- NOW, THAT'S A KNIFE!

steve antonucci

>

Re: Fog, Texas size gouge

#5

That's one honkin' gouge

john lucas

>

Re: Fog, Texas size gouge

#6

Hahaha - Mine's bigger than yours LoL

Doug Thompson near Cleveland

>This is a novelty and not made to be used so it has the extra deep flute. It's 1 inch diameter, 13-1/2 inches long with a 9-1/2 inch flute! Fog and I were joking last year about a Texas size gouge for a woodturning weekend raffle the club has every year, if the club raises a few extra bucks then it was worth it.

It took some creative machining to get this done.

Re: Fog, Texas size gouge

#7

Re: Hahaha - Mine's bigger than yours LoL

Paul Zerjay

>Haven't you heard size does not matter?

Re: Fog, Texas size gouge

#8

Now, Thats a gouge.

Norm Smith

>

Re: Fog, Texas size gouge

#9

Re: Hahaha - Mine's bigger than yours LoL

Doug Thompson near Cleveland

>Paul, your right only in woodturning.

To compare here's a picture of a 3/4 down to a 3/8. I still laugh when I see it... back to work.


img

Re: Fog, Texas size gouge

#10

Re: Hahaha - Mine's bigger than yours LoL

Brian McInturff

>Hey Doug,

In Hannes video on "you tube" he has a 1" bowl gouge. Do you make them just for him, special order, or are they just not realistic to make any more. I'm just curious as why anyone would need one that large or is the one he has really a 3/4. Thanks, Brian

Re: Fog, Texas size gouge

#11

Re: Hahaha - Mine's bigger than yours LoL

Doug Thompson near Cleveland

>Brian,

I do make a 1 inch shallow bowl gouge for Johannes, he'll use it to rough a blank, waste away wood in a hurry and for a finish cut inside a sunhat or baseball cap. On the inside of a hat it works like a U shape bowl gouge that shears the wood so well but it has a much larger cutting edge. Notice the way he grinds the tools, the wings are way back so you don't get a catch.

I don't sell them for two reasons first I don't like to make them and second I don't like to make them. I'm going to send him some tomorrow and he's been waiting a long while.

Re: Fog, Texas size gouge

#12

Doug - You should be from Texas

Fog Tanner

>Now that is a Texas size gouge. You must have relatives from Texas somewhere in your family tree. I am not sure why you say it isn't to be used. It's made from your excellent steel, has an edge amd we have some big lathes here. We also have some big wood too. Now all I have to do is come up with a big handle for that. I think I have a piece of Mesquite or Pecan that will work, but it will have to have threaded inserts and set screws so you can remove it for sharpening it.

That is really a great looking tool and I am sure that there will be several people buying extra tickets this year. I know one guy that will be spending quiet a few extra dollars, he is a big giy with a big lathe that likes to turns big wood. Our club really appreciates your support, we raised quite a bit of money last year and there are a number of guys/gals that got a smile after winning a genuine Thompson gouge. This one will be center place in our raffel area this year again.

Thanks again,

Fog

Re: Fog, Texas size gouge

#13

Re: Doug - You should be from Texas

Doug Thompson near Cleveland

>Fog, I do hope someone has some enjoyment showing this around. Wait till you see how big it really is... it's going to take one mighty big man to tame this one.

I do appreciate your support last year... your club was a huge help!

I'm going to put a handle on the other one then bring it out when I have to turn on a Jet mini. I hope people laugh and don't look at me like I'm crazy.

Re: Fog, Texas size gouge

#14

Re: Doug - You should be from Texas

Fog Tanner

>Doug,

I am sure that the Texas Gouge will be much appreciated and used, we do have some big guys in the club. I was thinking of adding an eye-bolt on the handle to use one of those straps off a weed eater so it can be held when sharpening and going back and forth from the lathe.

A couple of years ago at our Retreat in a pen turning rotation, I used a 1" skew to make a pen with. It started when one guy pulled a 5/8" bowl gouge out, so I pulled out a 1" skew and we had a laugh. He put the 5/8" away and got a 3/8" instead. Just for grins I used the 1" the whole way and we got a laugh out of it. Hope you get pictures of you using it on a mini-lathe.

Thanks again,

Fog