Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Question on Central Machinery lathe

Posts

Question on Central Machinery lathe

#1

Question on Central Machinery lathe

jeff

>I bought on ebay a Central Machinery lathe head stock.

The online catalog has no information.

Any idea as to the spindle size and thread they use?

Also, any suggestions where to get chucks and such?

Jeff

Re: Question on Central Machinery lathe

#2

Re: Question on Central Machinery lathe

Ken

>It has the 1"x8 thread,it is the same thread size as the Ricon mini.I use the Nova midi chuck on my Ricon.I had the CM for a very short time and used the same face plate and chuck on both of them.

Re: Question on Central Machinery lathe

#3

Re: Question on Central Machinery lathe *LINK*

Jeff Rich

>I have 2 central machinery lathes, They have the typical 1" by 8tpi spindles. Order some belts, you will need them if you turn a lot.

I bought chucks from Grizzly and from Ebay. Both chucks did a very good job once I got used to the quirkiness of each.

I just purchased a SuperNova2 and I like it a lot. There have been some sales recently on them so shop around.

If you dont mind messing around with it, the CM lathe does a pretty good job. You can pull up an owners manual that has all the parts list and numbers and you can order parts from Harbor Freight. I will post the link to the manual. Have Fun!


Manual for Central Machinery 34706 Lathe