Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Metamorphosis

Posts

Metamorphosis

#1

Metamorphosis

Bill Clark

>This piece was inspired by John Jordan�s work. I�m drawn to his beautiful carved hollow forms. I thought I�d try my hand at carving and pyrography. This piece is black walnut turned in a traditional form but with slightly thicker walls to accommodate the deep carving between the segments. The petal top of each segment was carved to give the feel of an opening bud or seed pod. The segments were hand carved, wire brushed then burned with a small pyrography skew. The piece was finished with shellac then buffed with steel wool to soften the finish. It�s 5 �� tall, 6� wide and sits on a 1 5/8� base. All comments/critiques welcome.


img

Re: Metamorphosis

#2

Re: Metamorphosis Top

Bill Clark

>Top View


img

Re: Metamorphosis

#3

Re: Metamorphosis Top

Mark Paulley

>Bill,

SUPER piece!!!! Every aspect really blends with the whole piece.

Thanks for posting

Mark

Re: Metamorphosis

#4

Re: Metamorphosis Top

John K Jordan

>Very nice. I actually like this a lot better than the typical piece I've seen from "that other guy". The form, texture, and color are outstanding.

JKJ

Re: Metamorphosis

#5

Re: Metamorphosis Top

Bill Clark

>Thanks Mark and John (the other one, LOL) for the nice comments.

Re: Metamorphosis

#6

Very impressive...

GaryG in MD

>That's lovely, Bill. Excellent form, and lots of work on the carving and burning. I like it a lot. ...Gary

Re: Metamorphosis

#7

Re: Very impressive...

Don at Central Illinois

>Beautiful. Everythings blends together without showing off more of the pyrography, or the carving. Each are equal and adds to each other.

Re: Metamorphosis

#8

Re: Metamorphosis

Mick

>Without a doubt, it is superb..shape, pyro, carving, turning,,,it is divine..but maybe ya'll can educate me..For the life of me I cannot understand the itty-bitty bases on pieces like this...I'm always nervous they are gonna topple...But, golly it is a work of art

Re: Metamorphosis

#9

Thanks!

Bill Clark

>Thanks Gary, Don and Mick for the nice comments. It was very time consuming to make. The hollow form was the fast part. Hand carving, wire brushing and the burning (which took about 8 hours itself) was the hard part.

Mick, from my observation and training, form is very important in art (woodturning). You can have the nicest technical piece but if the form doesn't flow properly, if it's out of balance or one element overpowers the other then the piece just doesn't work irregardless of the technical skills of the turning. In this piece the form I was after needed a small base to follow the curve I wanted to keep it in balance. If you have a small base like this one you can make your walls very thin on top and allow them to widen a little near the base to add internal weight to insure it is stable on the base. My wife also has suggested a few marbles inside to weigh it down. I nixed the marbles but it was a good idea.

Re: Metamorphosis

#10

Re: Metamorphosis

Mick

>Thanks for the tutorial...art is in the eye of the beholder..yes it flows..yes it is even elegant..but I just can't help being nervous looking at pieces like this.ooops, over she goes...I guess at heart I'm just too utilitarian to be comfy with it...but I truly appreciate your work and your sharing..Thanks