Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Good turning and be safe

Posts

Good turning and be safe

#1

Good turning and be safe

Bill Hale

>Well, I remind you all to be safe on a regular basis. Again I do it to myself. No shield but safety glasses, are they bent up. This piece was large enough a shield would have done no good anyway. Very wet Mesquite, about 12", between centers for ext. rough out, almost done and the nib broke off.

Like I say " Good turning and be safe "

Bill in CG, AZ


img

Re: Good turning and be safe

#2

Re: Good turning and be safe

David Walser

>Bill,

I'm grateful the damage wasn't more serious.

Re: Good turning and be safe

#3

Bill, Glad you're still with us! But,

Allen Neighbors

>you gotta take it a little easier. Coming at you from between centers means you must have been hogging off a lot of wood!

Don't be telling other folks that your wife hit you, now that we know the truth!... :)

Re: Good turning and be safe

#4

Re: Good turning and be safe

Philip Duffy

>Ahhh, its too bad for the black eye but glad you will recover fully! Have to disagree about the face shield; I have taken bigger and harder hits than that one of your's and the shield kept me unscathed! Philip

Re: Good turning and be safe

#5

Re: Good turning and be safe

George Van

>Ouch!!! That had to hurt!! Glad that is all the damage. Because of your experience I will be more careful in the shop. We always think nothing can happen when the piece is held between centers, well����

Heal quickly, George

Re: Good turning and be safe

#6

Re: Good turning and be safe

Fred Meyers

>Glad the damage to your head is not more severe and hope the pain you are experiencing quickly resolves.

Having been a Safety Engineer for 30 years I believe you are incorrect that a face shield would NOT have helped -- it would have absorbed most of the energy of the impact, rather than your head.

Be safe - invest in a face shield

Fred Meyers

Re: Good turning and be safe

#7

Steven Antonucci

Agree with Phil

steve antonucci

>I think a faceshield would have spared you any damage. I'd guess the black eye was cause by the wood slamming your glasses, and a faceshield would have distributed the impact. I've had a shield knocked 10' behind me and taken 3 steps back from impact with no mark at all on me.

Thanks for posting. Hope you feel better in the AM.

Steven

Re: Good turning and be safe

#8

Damn!!

Dave Peebles Lyons, Ohio!

>Hello Bill,

Happy to hear your are ok, well mostly :)

Also, thanks for having the guts to post the pic of the damage. We all need a wake up call now and then.

Thank you for doing that.

Dave

Re: Good turning and be safe

#9

Re: Good turning and be safe

Barry Elder

>Agree with Phil!

Re: Good turning and be safe

#10

Re: Good turning and be safe

Bill Hale

>Ok all I will try harder. I have one within 3 ft. of where I turn. I weare it a lot but I guess not enough. I did not think it would have controlled the impact that much.

Thanks Bill