Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

picking out a new lathe

Posts

picking out a new lathe

#1

picking out a new lathe

Glenn K

>I am realtively new to bowl turning but my small jet is already frustrating me. Is there a lathe that anyone would suggest I look at to use for bowl work? I am looking at the Powermatic 3520B. Does anyone have any insight into that unit as well?

Thank you for the help

Re: picking out a new lathe

#2

Re: picking out a new lathe

David Walser

>The Powermatic lathe is all most turners will ever need. It's smooth, powerful, and expandable. If you want to turn a bowl larger than it's swing will allow, just slide the headstock to the end of the bed and you can turn a bowl that would reach the floor. Want to turn a spindle longer than the standard bed will allow? Just add on the available bed extension.

For nothing but bowls, there are specialized lathes. Arguably there are better lathes than the Powermatic (Oneway and Robust may be two examples), but most could turn an entire lifetime and not be limited by the Powermatic's capabilities.

Re: picking out a new lathe

#3

David has given you an ...

Ed Moore

>excellent answer. Everyone I know who has a Powermatic lathe is very pleased with it. As he said, Oneway and Robust are excellent lathes with outstanding customer service if needed. But Powermatic also has very good customer service and deserves credit for this.

Some feel that the Powermatic 3520B offers the most bang for the buck out there.

Go for it, and enjoy it.

Ed

Re: picking out a new lathe

#4

Steven Antonucci

3520 is an excellent lathe

steve antonucci

>Do you need that much lathe? Could you get by with something lesser (yes, most certainly is the answer!)?

If you buy one, you will not be disappointed. I have a Nova 3000, and I think it's the best lathe under $1K new. Used, even less than $1K. Is it a 3520? Not even close, but it produces excellent results.

Personally, I'd look at a "used" lathe before plunking down $$$ on a new one. If I couldn't find what I needed, I'd buy a 3520B or better.

Steven

Re: picking out a new lathe

#5

Re: 3520 is an excellent lathe

Bill Hale / The Wood Spinner

>One thing to remember is that the higher the quality of the lathe you buy the more it is worth when if you decide to sell it.

As with any tool quality costs more but in the long run may be the cheapest. Buy the best you are willing to afford. I am a Oneway guy with a 2436 3hp and all the bells and whistles. I love it !

Good turning and be safe

Bill Hale in CG, AZ.

Re: picking out a new lathe

#6

Re: picking out a new lathe

Jim

>I have just jumped from a Jet Mini to a 3520B. I don't actually have it yet, but it's ordered and should be here in about 2 weeks. In the past, everytime I upgraded, it cost me more money in the long run. Seems I always upgraded multiple times. Hopefully, that won't happen this time. From all my research, the 3520 has a lot to offer for the money, and I don't think I'll outgrow it.

Jim