Re: Suspended development? I'm done with...
GaryG in MD
>That's nice work Jamie -- I like it. I understand your quandry -- you may have to make two or three tops and try them out to see which you like best in place. ...or, of course, you could ask us again. ;-)
It's a pretty substantial form, and I think it will support a pretty substantial finial -- not one of those "delicate" ones.
I can see it in one of two ways:
1) Put a black or red lacquer domed box-lid type top on it that overlaps the lip by a fair amount and has a thin, Japanese-style "handle" that mirrors the shape of the main support wings and is attached at two fairly closely spaced points... or...
2)if you want to go for a tall finial, my reco for the height is to make the top of the finial, when in place, exactly twice the height from the contact point to the top of the shoulder (not including the lip). I realize that's not a typical "magic" number, but it seems right to me. I'd try for something like an onion dome on the lower end and finish it with a flame at the top.
JMOs, Gary