Erosion #1
Danny Wells
>This one was inspired by Neil Scobie (I hope I spelled his name right).
Cocobolo barrel and Blackwood lipstop, ivory mouthpiece. It was hard to get the light right to show off the "gulleys". Looks better in the hand.
Knowledge You Can Build On — Est. 1998
Erosion #1
Danny Wells
>This one was inspired by Neil Scobie (I hope I spelled his name right).
Cocobolo barrel and Blackwood lipstop, ivory mouthpiece. It was hard to get the light right to show off the "gulleys". Looks better in the hand.
Re: Erosion #1
Danny Wells
>another view.
Re: Erosion #1
Danny Wells
>and the bell.
Re: Erosion #1
john lucas
>Pretty cool. I like Neil Scobie's work. All you need to do is add more light to the front. Just move the left light further to the front or bounce light back in with a reflector. If your using a translucent photo booth just move the piece further back. You have good contrast the left light is just too far back so you aren't filling in the shadows on the front.
Re: Erosion #1
Danny Wells
>Thanks John,
I'll try that.
Danny
Don't know about this one...
steve antonucci
>I'm a fan of the stuff you do, but this one doesn't do it for me.
The refinement of the ivory and brass seem to compete with the "Scobie elements" for attention. Unlike the Nitman piece, I looked at this one and thought it wasn't my favorite. I would have preferred either a refined treatment throughout or an overall "Scobie" treatment, but mixing them doesn't work for me.
Steven
Re: Don't know about this one...
Danny Wells
>Thanks for the comment Steve,
Interestingly, I've thought about the same thing. This call was not totally planned out. I already had a blank drilled and partially turned that I decided to use. I didn't think that I had the time to carve a complete call, but I wanted to try it. I think for some folks the contrast of the refined to the carved will work, and even at that it had to have a carved lipstop. My real challenge was figuring out how I would incorporate the lanyard keeper if I carved the whole call.
But, even for me I think for it to get the best response the the total call needs to carved, barrel, mouthpiece and lipstop. I would be surprised if it even places in the competition, but you never know what the competition is going to be.
The next one will be totally carved. Thanks again for the critique.
Re: Erosion #1- Got 3rd place
Danny Wells
>Well it placed 3rd in the carved and/or painted category and sold for $220. They guy who bought it just loved it. So...I won't get to try another photo John.
Re: Erosion #1- Got 3rd place
Mike Stafford
>Third is not bad so congratulations! I would be very pleased and $220 should ease the disappointment a bit...Keep up the excellent work.
Re: Erosion #1- Got 3rd place
Danny Wells
>I was pleased Mike. It was worth a little more as trumpet yelpers go, but calls on the silent auction normally go a lot less than that, so I was pleased. I found the buyer, and he thought he had a real prize, was really appreciative of the work, so that was really satisfying, and he intends to hunt with it.
Thanks for the kind words.