Fluted Dyed Poplar (Aspen)
Bruce Forrest
>This vase is poplar aka aspen (genus Populus). It measures about 10 3/8 inches tall. It was fluted and then dyed with orange and black aniline dyes.
Comments welcome.
Knowledge You Can Build On — Est. 1998
Fluted Dyed Poplar (Aspen)
Bruce Forrest
>This vase is poplar aka aspen (genus Populus). It measures about 10 3/8 inches tall. It was fluted and then dyed with orange and black aniline dyes.
Comments welcome.
lovely
GaryG in MD
>Very nice shape Bruce -- and great color.
How do you modulate the dyes -- do you wipe on / wipe off and let it go where it will, or do you apply it preferentially, as if you were "painting"? Different durations of soak? ...etc.
Thanks, Gary
Re: lovely
Bruce Forrest
>Thanks. With this piece it was just a case of mixing the dyes. Mostly orange with just a touch of black (a little goes a long way) and then applying it liberally. Then I usually give it a quick dry with some 30 sec to 1 minute bursts in the microwave.
Re: lovely
GaryG in MD
>OK, interesting -- just let Mother Nature do the design -- love it.
Do you seal at all before the dye, or apply to the raw wood?
Sand first or after or both? ...Gary
Re: lovely
Bruce Forrest
>The dye is applied to the raw wood. I use water based aniline dyes. I sand, then dampen to raise the grain, lightly sand to remove the nubs and then apply the dye. Then I apply the first of many coats of finish ( in this case it's wipe-on poly.) Between coats, I lightly sand with 600 grit as necessary. This wood really drinks up the finish, so this piece has about 12 coats.
thanks...
GaryG in MD
>Thanks a lot Bruce. I appreciate the clear description. I've never used color, but I'm looking forward to trying it out some time. I've got some fairly plain soft maple that can benefit from a little enhancement. ...Gary
Re: How do you apply color
Bill Hale / The Wood Spinner
>Bruce
My question is exactly how do you apply the dye? On this piece it looks like you have red over a darker color. Do you do one color, let it dry and do a second layer of color or what?
I love the colors and would sure like to know how to do it.
Thanks Bill
Re: How do you apply color
GaryG in MD
>Bill, I had the same question -- see Bruce's first response to my first reply (item #3 in the chain). It seems like he does it as a one-step process. That really surprised me. ...Gary
Re: How do you apply color
Bill Hale / The Wood Spinner
>Thanks Gary
I am looking for more detail on the application of the color. One time wet multi layer or what. I want to know how to get the light dark look.
Bill