Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Pen turning start up advice needed...

Posts

Pen turning start up advice needed...

#1

Pen turning start up advice needed...

Kris Lasure

>Hello wood turners -

First off, I admit I don't own a lathe, but one of these days! It seems like I own every other woodworking machine and tool, but unfortunatley no lathe.

I'm in the commercial construction industry and have always wanted a unique "thank you" gift to give to my customers. After all, they spend a lot money with our company for buildings and besides the usual gift cards and stuff, I thought about turning pens/pencils and make custom pen cases to give to those individuals.

So my question is, where to start? Sure I need a lathe. Which one is highly recommended by you guys? I'm only looking at a mini lathe for now (since it is only pens). Then turning tools. I assume you only need a few type of gouges and such to turn a pen. Any brands you recommend. I've been through Lee Valley's catalog to start with looking at the different items needed for pen making.

I'm sure there are books out there as well as websites and other forums directed to pen making. I figured I'd start here and hear from the experts.

Any and all advice will be appreciated!

Thanks!

kl

Re: Pen turning start up advice needed...

#2

Re: Pen turning start up advice needed...

don at central illinois

>Check out Penn State Indurstries. They have kits, etc. Also, for resale value, the Jet Mini is hard to beat. Good luck.

Re: Pen turning start up advice needed...

#3

Re: Pen turning start up advice needed...

David Walser

>Here's a link to Craft Supplies USA's catalog listing their pen turning starter kits:

Craft Supplies starter kits

Craft Supplies is a quality outfit and I've always had a good experiance when working with them. Other companies are good, too. None are better.

All the standard disclaimers apply: I've no affiliation with the company, no financial interest in your following my advice, just a satisfied customer, no small animals were harmed in the production of this message, consult with your tax adviser before claiming any deductions, don't go swimming with piranhas, don't feed the bears, don't bring food to class unless you bring enough to share, etc.

Re: Pen turning start up advice needed...

#4

Re: Pen turning start up advice needed...

Jim Rutten

>Things you need to start off pen turning:

1. A lathe (the Jet mini is a great choice)

2. Lathe tools (the minumum for pen turning is probably a spindle gouge and a skew)

3. a drill press (hopefully you already have access to one of those)

4. a barrel trimmer (there are other ways to do this function with a sander)

5. the correct size drill bit to make the hole for your pen tubes (for instance I believe the "O" bit fits the slimline)

6. CA glue to glue the pen tubes into the wood and/or other material (if you are impatient you can get accelerator)

7. a mandrel

8. pen kits (one per pen you make)

9. bushings (one set per type of pen)

10. sandpaper (in appropriate grits)

11. some sort of finish (hut has some wax sticks that work good for this)

WARNING: You are starting down a slippery slope. We all thought we would just turn a few pens and be happy. There are ALWAYS new tools, finishes, sandpaper that you will need. Then comes the dreaded "lathe upgrade". My advise to you is to stay with this group and they will help push...I mean help you down that slope and hopefully end up in a good place.

Re: Pen turning start up advice needed...

#5

Re: Pen turning start up advice needed...

Robert Henderson

>Take a look at penturners.org for advice and inspiration

Re: Pen turning start up advice needed...

#6

Re: Pen turning start up advice needed...

John K Jordan

>Kris,

I think I buy every book published (it's a sickness) but a two on pen turning I liked the best are "Pens From the Wood Lathe" by Dick Sing and "Turning Pens and Pencils" by Kip Christensen and Rex Burningham.

You certainly don't need a big lathe for pens, but chances are you'll get hooked and want to turn wood all day and give up sleeping and eating. Consider that you can't turn big things on a small lathe but you can easily turn tiny things on a big lathe. That said, a mini lathe like the Jet will work great for pens and still turn bowls and things up to nearly 12" diameter.

Besides the lathe, tools, way to sharpen the tools, and a few pen-specific tools such as the mandrel, unless you buy only pre-drilled blanks you will also need a way to drill holes in the blanks (drillpress) and unless you only make pens from pen blanks, you will need a way to cut pen blanks from larger wood - a bandsaw is probably the best.

One thing you might consider: take a pen-turning class. My wife took one at the local Woodcraft store. She came home with a pen and had a great time. (This was the first thing she had ever made from wood in her life.) I think they did almost all of the turning with a small roughing gouge.

As for custom pens as gifts, an article in a recent woodturning magazine told about a guy who made a bunch of pens for Dick Cheney to give away. Each was laser engraved with the signature. If that sounds useful, there are companies who will laser engrave your pens for a small fee.

JKJ

Re: Pen turning start up advice needed...

#7

Re: Here it is *LINK*

Russ Fairfield

>Take a look at my website. It should asnwer sone of your questions.


http://www.woodturner-russ.com/Pen10.html

Re: Pen turning start up advice needed...

#8

Thanks for all the info...

Kris Lasure

>The more I read from you guys the more anxious I get about getting a lathe. All the information has been tremendous so far. Thanks for the links as well.

I've got the bandsaw and drill press covered just need to pick a lathe. Wish I had the room for a big lathe at this time, but my shop is full enough so the Jet sounds like a great starting point.

I still have about 5 months before my one of my projects ends so I've go a little time to gather supplies and practice before I officially give any away.

I told LOML about my idea and she's all for it! That is until I'm out in shop till the wee hours of the morning turning away. I already know it's going to be addicting.

Thanks again, fella's!

kl

Re: Pen turning start up advice needed...

#9

Re: Thanks for all the info...

John K Jordan

>>...I told LOML about my idea and she's all for it! That is until...

Just get her interested in making pens too and make it a family thing! Then perhaps she will remain quite supportive AND help with the production AND feel more a part of things! You could take a pen-turning course together.

JKJ

Re: Pen turning start up advice needed...

#10

Re: Thanks for all the info...

Gary Evans Tallassee, TN

>Kris,

Russ gave you the link to some of his how-to information, but he also sells an excellent video on pen-turning. Well worth the few bucks it costs.

Gary

Re: Pen turning start up advice needed...

#11

Re: Thanks for all the info...

Wayne Kuhn

>My crystal ball shows bottle stoppers, pepper grinders, bracelet helpers, kolidascopes, are all in your future.

Whats this? Bowls and hollow forms. I also see a larger variable speed lathe possibly a powermatic maybe a oneway ,chucks, turning tools and sharpening gigs in your future. Wait ..wait.. I'm getting something about your flat woodworking tools being used as benches for drying bowls. Welcome to the world of turning.