Re: taps for threading holes
Carol - now in NC Nebraska
>Thanks.
And thanks, Gil. I stand corrected on the size of the Jet live center. You saved me from ordering the wrong thing. (I went out and measured the thing to be sure.)
I already have an MSC order building because of another item I could only find there, so MSC it is.
I got to looking to find a definition of each kind of tap. I have a whole set that I have used for years and had no idea there were more than two kinds - "regular" and bottom." Shows what I don't know. :)
A taper tap has 8-10 tapered threads and is used as the 1st tap used in tapping a blind hole.
A plug tap has 3-5 tapered threads and is used as the 2nd tap in tapping a blind hole. Plug taps can be used in place of taper taps.
A bottom tap has 1 to 1-1/2 tapered threads and is used to tap to the bottom of a blind hole. It is the last tap in the sequence for blind holes.
Courtesy of toolingu.com.
I will get the plug taps. Sounds like a reasonable compromise for what I have in mind, given the diameter of the holes.