Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

New wine in old bottles

Posts

New wine in old bottles

#1

New wine in old bottles

adrien

>Just bought a 3 quart box of wine. It comes in a soft plastic container with a spigot at the bottom and is in a carton box to protect it. The enclosed wine therefore never gets exposed to air, 'cause the plastic collapses in on the wine as it is used.

Has anyone re-used one of these "boxes" to contain and dispense finish (such as waterlox) that thickens on exposure to air?

Re: New wine in old bottles

#2

Re: New wine in old bottles

Mac

>If you finish that wine by midnight, you wont care about the Waterlox...............

Re: New wine in old bottles

#3

Re: New wine in old bottles

Allen Neighbors

>I like Mac's answer! :) However, I have used one of those plastic IV feeding bags from the hospital (I had a chance to get a full box of new ones). I put Russ's 'homebrew' finish in it. The tube clogged up after sitting for a week or so without me using it, but the finish is still good. I trimmed the tube shorter, and when I unclip it, I stick a toothpick in the hole to clear it, and then use the finish.

I would think that if the plastic will stand up to wine, it should stand up to tung oil, at least. It'd be worth a try! Let us know how it works out, if you attempt it.

Re: New wine in old bottles

#4

Allan, I'm so glad you explained.......

Ruth Niles

>When you said you used the IV feeding bag, an instant mental picture was of you in a hospital............ never mind! : )

Re: New wine in old bottles

#5

Re: New wine in old bottles

HaveWoodWillTurn

>Adrian: I have been using exactally that method for several years for preserviing Waterlox. It works excellent. Rinse out the bag well, let dry, then pour in the finish. Put the spigot back on, open it up, and squeeze out all the air, turn the spigot off and insert into the box. My Waterlox remains good as new right up to the last drop. That's at least a couple years for me since I only use it occasionally. The only problem you'll have is the spigots tend to freeze up from the finish. I just replace the spigot when that happens. Fortunately I have a "friend" who keeps me stocked up on spigots. ;>} Feel free to PM me if you have any questions. Ed

Re: New wine in old bottles

#6

Neat. Ed, you made my day.

adrien

>