Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

McNaughton question

Posts

McNaughton question

#1

McNaughton question

Steven Kubien

>I picked up the McNaughton centre saver today and I have the first (of no doubt many) question(s)...

The instructions mention a brass pin which goes into the gate. There is no such thing in my kit, nor is there a set screw (thought there is a threaded hole for one). As it is, the entire gate and upper rest will rotate on the support post and is not mechanically attached in any way. Is it supposed to be this way or am I truly missing parts and asking for an injury? My thinking is that there should be something in that little tapped hole to lock the upper sections on to the shaft, but still have the the ability to rotate.

What say you?

Steve Kubien

Ajax, Ontario

Re: McNaughton question

#2

Re: McNaughton question

Fog Tanner

>Steve,

Mine is about 5 years old and did not come with a brass pin. It does have a set screw which runs in the grove on the tool post to keep you from lifing the gate off the post. It is tightened down enough to do that, but not keep it from rotating on the tool post. You should be able to pick up a set screw locally.

Since mine is the three post gate, when I got some of the mini knives I had to get the adapter for them. All the parts are made of steel and no brass so I don't know what the brass pin is for unless it is a stop to limit the rotation. I would have to look at mine, but I think there is a rolled pin to do than.

Enjoy the tool, there is a learning curve but it will pay for itself in the bowls you get. Mine has. The Mike Mahoney DVD is a good resource on how to use it with the least amount of problems.

Fog

Re: McNaughton question

#3

Re: McNaughton question

robo hippy

>Steve,

I don't have a clue about the brass pin, and I have had the system for 8 years, and up dated the tool rest within the last 2 years. You do need a set screw in the threaded hole, which should be easy to find at any hardware store.

For learning to use the tool, get some one locally who knows how to use it, get Mike's DVD, or (hope the moderators don't mind me mentioning this) I also have a DVD out on how to use this tool. It isn't easy to learn to do it all by yourself.

robo hippy

Re: McNaughton question

#4

Dick Hines

Re: McNaughton question

Dick Hines

>If you ever get a chance to watch Bill Grumbine do it. I have had a coring tool for a while and he have me some good advice. He can do with only one 2 fingers.

Re: McNaughton question

#5

Thanks everyone

Steven Kubien

>It looks like I either need to see Lee Valley about that screw or pick one up somewhere else.

Cheers,

Steve Kubien

Re: McNaughton question

#6

Re: Robo's DVD

gtwilkins

>I have just received my DVD from robo hippy and I am glad I waited to get it before bashing ahead with the McNaughton on my lonesome.

The DVD is an extremely helpful lesson, very well done and has many of the little gems that robo has learned from his frontline experiences over the years.

I highly recommend the DVD and now will finally be coring this weekend, feeling a lot more confident than I did, only having the paper instructions.

Trevor Wilkins, Powell River, B.C.