Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Cardiac Lamp

Posts

Cardiac Lamp

#1

Cardiac Lamp

john lucas

>This will be my entry in the Turned for Use AAW competition. I call it the Cardiac lamp. It is part of my problems with aging series. There are 30 individual Pieces if you include a couple of custom made brackets and spacer. The EKG and the AED paddles were woodburned. The heart was carved and the AED had all sorts of wood and metal working. The heart has replacement arteries. No they don't pump blood. Everyone I showed the lamp to asked that question.

The main body of the piece was an experiment. It was turned from Green cherry, hollowed with the pith dead center. It was hollowed to about 3/8" and then I put hose clamps on the top and bottom hoping it would stay round. The top stayed round to about .020" and the bottom stayed round except for an area with a knot. It was out about .070". I concealed the gap and out of round with the aluminum rings. I had to custom fit the inside of each ring.

I lost count of how many hours I've spent on this piece. Probably 15 to 20. Custom fitting the heart and the paddles to the curves on the lamp was fairly time consuming, as was carving the heart and milling out all the various recess in the AED to run the wires.

I has a touch control inside so when you touch the silver AED button the lamp comes on. I had to make a custom bracket to hold the touch control as well.


img

Re: Cardiac Lamp

#2

Re: Cardiac Lamp detail

john lucas

>The AED paddles are bleached cherry with wood burned details. The AED is Cherry, plexiglas, aluminum and yellowheart.


img

Re: Cardiac Lamp

#3

Heart detail

john lucas

>I couldn't find hose without writing on it. I looked hard. I have since located a possibility so I may try to change that later.


img

Re: Cardiac Lamp

#4

Re: Heart detail

Don Orr

>Awesome John-outstanding concept and exceptional execution. But what else have we come to expect from you !

Re: Cardiac Lamp

#5

Re: Cardiac Lamp

David Walser

>John,

The lamp would look great in a doctor's office and it's exceptional work. However, I'm afraid it would give me the creeps sitting on a table in my den (assuming I had a den). I'm trying to imagine how I'd feel glancing at the lamp late at night and seeing those tubes coming out of such a realistic looking heart. Even thinking about it, a chill runs down my spine.

Anyway, great job! It's a wonderful piece -- even if it is one of the few turnings I've really liked that I haven't wanted to own.

Re: Cardiac Lamp

#6

Re: Heart detail

Bill Crommett

>John: Your creativity is amazing. It is too bad you have to spend your time working for a living, but if the EKG is a copy of your own EKG don't worry, you are too sick to work anyway.

Re: Cardiac Lamp

#7

Re: Cardiac Lamp

robert davis

>great job,john

Re: Cardiac Lamp

#8

Re: Heart detail

John K Jordan

>>...I couldn't find hose without writing on it.

What size is the hose? I once salvaged some clear hose from some medical equipment. If it's the right size and if you still need it (and if I can find it!) you can have it.

Of course, the hose should actually be painted/dyed bright red on the inside, no?

JKJ

Re: Cardiac Lamp

#9

Re: Cardiac Lamp

Steven Kubien

>Kinda creepy but WOW! Love the creativity and the use of different techniques.

Steve Kubien

-still kinda creepy

Re: Cardiac Lamp

#10

You knocked that out in 20 hours?

Eddie Pacheco; San Jose, Ca.

>Man, it looks like it took longer that that. Pretty cool, I like it!

I didn't know that hose clamps could minimize wood distortion. That's a good tip to keep on file.

Re: Cardiac Lamp

#11

Steven Antonucci

Now you need to make it beep beep beep ...

steve antonucci

>and then flatline to complete the effect!

Is the EKG from an older person or is it a best guess at what a real one might look like? You've done a stunning job on executing the lamp, and the photo of it is a thing of beauty.

As others have mentioned, I'd also be a little bit creeped out if it was in my livingroom, but it could be any body part (even the fishnet stocking leg from A Christmas Story- "It's a major award!")

Steve

Re: Cardiac Lamp

#12

Re: Heart detail

john lucas

>John I've found a source for clear tubing. You have to go to medical quality hose. it takes 3 different sizes.

Re: Cardiac Lamp

#13

Mike Stafford

Re: Heart detail

Mike Stafford

>Methinks you have found the legendary Tell Tale Heart. It wasn't in the wall after all it was just hidden behind the lamp.

Very creative, John!

Re: Cardiac Lamp

#14

Thank you all very much

john lucas

>

Re: Cardiac Lamp

#15

automated external defibrillator/antiepilepsy drug

adrien

>

Re: Cardiac Lamp

#16

Keith Tompkins

Re: Cardiac Lamp

Keith Tompkins

>Good luck, John! I think you'll do well. I can imagine this lamp in a doctor's office!! You have some imagination.

Re: Cardiac Lamp

#17

Re: Cardiac Lamp

Clay Foster

>That's way cool, John. You really put your heart into it.

Re: Cardiac Lamp

#18

Thanks Clay

john lucas

>You had a sly grin when you made the last statement I'm sure. :)