Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Save your wood scraps for segmented turning

Posts

Save your wood scraps for segmented turning

#1

Save your wood scraps for segmented turning

georgetroy

>The more I work in the shop, because of cold weather the more my scraps build up. I have boards that I rip and slice for segmentation, but I also slice some of the limb logs I use for special effects. All segmented turning does not have to be large and feature exotics. I have lots of drawings for small vases and bowls. If you want to do segmented turning or need an idea for small salad bowls, here is a couple. I make these in pairs of two or four. Use your favorite safe for food finish on these. This is not an attempt to discuss all phases of segmenting, just a start to recyle and use what you have. There are books out there and web sites to help you understand the processes. GT


img

Re: Save your wood scraps for segmented turning

#2

Steven Antonucci

I have, but I've never used them...

steve antonucci

>I cut all of my larger offcuts into mini sizes. Long things become pen blanks. Small things go to a bag that I give to a jewelry maker. Shavings go to compost.

Some day I will use all of the pieces I have amassed to make the mother of all segmented turnings.

Someday...

S

Re: Save your wood scraps for segmented turning

#3

Re: Save your wood scraps for segmented turning

Bob Macgregor

>Another source of scraps comes from when I bracket the pith in cutting a blank from a log. This gives me a (roughly) one-inch wide board with pith in the middle but clear wood on each side. A little smoothing, ripping, sizing and away you go for segmenting or pens or whatever (including firewood, of course).

Re: Save your wood scraps for segmented turning

#4

My pile keeps outgrowing my workshop space!

Mike Brazeau

>

Re: Save your wood scraps for segmented turning

#5

Steven Antonucci

I make them 2" thick and use them for handles

steve antonucci

>That's usually quartersawn wood, and it's very stable. I have stacks air drying for someday...

S