Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Grinder review.... where? when?

Posts

Grinder review.... where? when?

#1

Grinder review.... where? when?

Scott in Montana

>Maybe somebody can refresh my memory... Within the last year I read a review of low speed grinders, but darned if I can remember what magazine that was in. Anyone remember?

I would sure welcome any input on a grinder or other sharpener for sharpening gouges.

Thanks,

Scott

Re: Grinder review.... where? when?

#2

Re: Grinder review.... where? when? *LINK*

Steven Kubien

>Scott,

I cannot help you with the grinder article but since you asked about other sharpening systems I thought I would offer my 2 cents...

I use the belt grinder/sander from Lee Valley (see link below) along with one of their 120grit blue zirconia belts. I also have an 80 grit belt for serious reshaping. I mounted the whole thing on a hunk of plywood. My version of a Wolverine rig is a piece of slotted aluminum track with a 3" high block attached at one end. On top of the block I epoxied a couple of washers to house the leg of a vari grind jig. Right now I have the track held in place by a couple of holdfasts but will eventually make it more moveable. I sharpen my skews freehand (it's not tough) and scrapers and parting tools on the platform/rest which comes with the sander. This is a really fast set up, runs cool and saved me having to fork extra dough over for really good wheels. It also stops spinning very quickly unlike any grinder I have used. One belt seems to last about about a year.

HTH

Steve Kubien


img

http://www.leevalley.com/wood/page.aspx?c=1&p=44884&cat=1,43072