Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Thoughts on "Learning Experiences"

Posts

Thoughts on "Learning Experiences"

#1

Thoughts on "Learning Experiences"

Brian Hahn in SW Wisconsin

>I have some sayings posted around my shop for inspiration in "difficult" moments. One of my favorites is one that popped into my head a year ago:

The difference between a mistake and a learning experience is your attitude.

There are several well-known corollaries:

It's only practice for the next piece.

It's not the destination...

It's the journey.

And yes, I had a couple of learning experiences yesterday and I remembered a couple of previous ones as well.

Re: Thoughts on "Learning Experiences"

#2

Re: Thoughts on "Learning Experiences"

Wally Dickerman in Arizona

>I think that my favorite is "Make your mistakes look like that's what you intended to do in the first place"

Kind of goes along with a mistake being "A design change opportunity"

Wally

Re: Thoughts on "Learning Experiences"

#3

Re: My favorite is:

Winnemucca Lynn

>"Before you can be good at anything, you must first have the courage to be bad." I have tried to set my life by this.

L.

Re: Thoughts on "Learning Experiences"

#4

Re: Thoughts on "Learning Experiences"

Bill Hale / The Wood Spinner

>Wally

That makes me think of a piece I did a couple of weeks back. It started as a large Dia. necked hollow form. A little to thin on the neck and off it came. Ok Now just a rolled up edge hollow form, a little unseen check in the edge and off came another piece. Now a rolled edge platter and again another piece. Now I have a beautiful 14" mesquite platter.

Like you said that is what I wanted all along!

Bill

Re: Thoughts on "Learning Experiences"

#5

That's a good one and so true.

Brian Hahn in SW Wisconsin

>