Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Coloring with Lye

Posts

Coloring with Lye

#1

Coloring with Lye

HarryB in Downtown Kulpsville

>I was going through some old Fine Woodworking magazines last night and saw a response to a previous article on coloring Cherry using lye. Unfortunately, I don't have the earlier magazine.

I've just rough turned a little cherry bowl and wonder how this treatment works. Have any of you used this method or know anything about it? I'd really appreaciate hearing from you.

Re: Coloring with Lye

#2

Re: Coloring with Lye

Mark in B'ham, AL

>Did it say which issue the prior article was in? I've got a lot of older FWW mags. I bet somebody around here has every single one.

Re: Coloring with Lye

#3

Re: Coloring with Lye

HarryB in Downtown Kulpsville

>I was looking at the Jan/Feb 1989, Issue #74. The writer said, "Some time back, Fine Woodworking had an article on using lye to enhance the color of cherry." No issue number, no date. Thanks for your interest.

Harry

Re: Coloring with Lye

#4

Re: Coloring with Lye

James McClure

>Would it have a bleaching effect or would it make it more red?

Re: Coloring with Lye

#5

Jim DeLaney, Austintown, Ohio

Re: Coloring with Lye

Jim DeLaney, Austintown, Ohio

>A teaspoon of lye in a quart of warm water (taking all necessary safety precautions) when brushed onto cherry will instantly turn it a deep, dark red - about what several years of exposure to sunlight would do.

I've used the technique when repairing older furniture, with good results.

You'd definitely want to remove the piece from the lathe to apply the lye solution, and you'd want it completely dry before putting it back on the lathe. Tou sure don't want little droplets of lye water flying off it!

Some say that the lye should be neutralized with a weak vinegar solution, but others say the lye is self-neutralizing, I've used both methods, and haven't seen a difference.

Jim D.

Re: Coloring with Lye

#6

Re: Coloring with Lye-some experience with this

Carol - now in NC Nebraska

>The lye reacts with properties in the cherry to accelerate cherry's natural tendency to turn deeper red.

It other words it is a chemical process. And one with some dangers.

You need an extremely well vented area to do this. You will need rubber gloves, rubber apron, and rubber boots. You are dealing with acid here.

We mixed water with the lye (don't remember the proportions) and swabbed it on liberally. We did this outside and let things sit while we kept an eye on the color. You could just let it dry on to get the maximum reaction. Be careful how you dispose of this stuff.

Won't do your lawn any good and many municipalities prohibit putting that sort of thing in the sewer system. It is very toxic. We captured it and took it to a guy with a toxic waste license for disposal. Metal containers only.

Also will kill pets, and other creatures of nature if they can get into it. You would not want the mixture (or the sanding dust) to come into contact with anything you care about.

Then we swabbed on white vinegar water to stop the chemical reaction.

Finally we rinsed it with clear water, until we could no longer smell either the lye or the vinegar.

Now it all had to dry. Then the raised grain had to be sanded (respiratory protection absolutely required). And filter the air with your dust collection.

Lots of work. Very toxic. Would we do it again. Nope! Now we just set cherry pieces in the sunlight and let nature do its thing.

Re: Coloring with Lye

#7

It is a chemical stain that darkens cherry

Brian Hahn in SW Wisconsin

>Lye darkens cherry just like sunlight darkens cherry.

I've used regular lye which is often sold as a drain cleaner and wood ash lye which technically is potash. For regular lye, use a tablespoon in a pint of water. For potash, fill a plastic container (an old quart yogurt container works well) with fresh (unweathered) hardwood ash, then fill with water and let it sit overnight. Filter the solution through several layers of paper towel or coffee filters.

They both types of lye work well. The solution is clear and when you apply it, the wood just looks wet. But within a minute or two the wood darkens. You can get additional color by letting the wood dry and applying another coat or three. Some samples of cherry darken more than others.

I don't neutralize the lye, especially with only one coat. The lye is consumed by the darkening reaction and there usually isn't any left to remove. If you are really concerned, rinsing with water is adequate to remove any unreacted lye.

Re: Coloring with Lye

#8

Re: Coloring with Lye-some experience with this

Bill Hale / The Wood Spinner

>Carol

Lye is not acid, it is just the opposite. As to a burn I will take acid anytime. I used to manage a creamery and we cleaned the equipment with a hot lye solution. One of the employees came to me one day and showed me a burn where he had gotten the solution on his arm. I immediately sent him to the hospital emergency room and they cleaned it up. He was told that lye continues to eat flesh and if he had not have come in when he did he would have lost the arm.

REALY BAD STUFF !

Good turning and be safe

Bill in CG, AZ.

Re: Coloring with Lye

#9

Re: Coloring with Lye

Steven Kubien

>Harry, I know nothing of the article you are talking about. If you want to 'age' cherry quickly I would consider taking it to a tanning salon. I seem to recall an article about this in Woodworking magazine last year.

be careful

Steve Kubien

Re: Coloring with Lye

#10

Re: Coloring with Lye-not that bad

adrien

>As others have noted, it's often used to clean a clogged drain (or a dingy stove interior). Yes it can burn, one has to be careful of one's eyes (and of woolen clothes).

But I had no trouble boiling my supers in a 55 gallon drum of lye solution to kill the foul brood spores that were destroying my bee hive. Took all the paint of quite nicely. Goggles, rubber gloves and just being generally careful, and there were no physical consequences.

There were no special fumes; obviously you don't want to inhale a spray or mist of the stuff.

As with acid, alkaline solutions have varying strengths. Lemon juice is acid; but not as worrisome as concentrated sulfuric acid. Baking soda is alkaline, but not a worrisome as concentrated lye solution.

Re: Coloring with Lye

#11

Re: Coloring with Lye-some experience with this

Dick Coers

>Couple of things about your advice Carol. Lye is a caustic, not an acid. Also if you put lye in an aluminum container you will make hydrogen gas. VERY EXPLOSIVE!!!! Best left to glass containers.

Re: Coloring with Lye

#12

Re: Coloring with Lye

HarryB in Downtown Kulpsville

>Thanks for all the quick responses. After listening to the warnings I think I'll just let nature take its course and let the little bowl darken naturally.

I'm less worried about the caustic nature of the lye than I am about sanding the raised grain after the treatment. Even with a dust mask there would be contaminated sanding dust all over the shop. I'll pass on this one!

Thanks again, Harry

Re: Coloring with Lye

#13

Re: Coloring with Lye-some experience with this

Carol - now in NC Nebraska

>Thanks, Dick. I humbly stand corrected.

The metal cans we use were old paint pails. That's what the guy at the toxic waste place suggested.

This was in Southern California. Lots of regulations there!

Re: Coloring with Lye

#14

Re: Coloring with Lye

Ron McKinley

>I tried it years ago. Just dip it in using a wire or string and pull it out. Works instantly. Then wash it good with a garden hose and let it dry and then polish it up....Ron

Re: Coloring with Lye

#15

Correction

Barry Turner

>"You are dealing with acid here."

Actually, you are not dealing with acid. Lye is an alkali, (the opposite of an acid), but as you correctly indicate, still toxic. Lye is still dangerous if not used with care, much like an acid.

Re: Coloring with Lye

#16

Re: Coloring with Lye

Barou

>Years ago I used lye to speed up the darkening of several cherry coffee tables I made. While the cherry darkened immediately over the years it has never aged beyond what the lye did. The wood looks washed out and not like any other cherry I've seen. I am disappointed with the process and will never use it again on a project any larger than a small lathe piece.