Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

New Record Mini Lathe from Woodcraft *LINK*

Posts

New Record Mini Lathe from Woodcraft *LINK*

#1

New Record Mini Lathe from Woodcraft *LINK*

georgetroy

>I just purchase the Record 24 X/C Mini lathe from Woodcraft. Great deal, no taxes, no freght and for the price of $200.00 while they last. I have a Vicmarc Mini lathe now, but I have to break it down for demos. I think this might be just what I'm looking for. I have turned enough on the Jet Minis with their breaking parts that I don't think it is for me. Good England steel and cast iron is hard to beat.

I don't need the length on the Record and more than likely will be cutting the bars down. It has some good specs. You can check out the details from the web site. I gave. I have chucks, and other fixtures that will fit 3/4" x 16" from a Cornet I used to own and gave to my Grandson.


Record 24 lathe

Re: New Record Mini Lathe from Woodcraft *LINK*

#2

Re: New Record Mini Lathe from Woodcraft

E.T.

>I have one of these lathes and I am thoroughly pleased with the quality of the castings and machining. I have upgraded some of the items, 4-step pulleys for 4 speeds, cam operated tool rest banjo, precision machined shafts for the bed bars. I used the lathe for teaching and demos where I needed to transport a lathe to the location. By removing the motor, headstock, tailstock and tool rest banjo I had an easily moved lathe that I could move single handed but could quickly assemble into a solid accurate machine. I would suggest that you mount the lathe base to a perfectly flat board. ET

Re: New Record Mini Lathe from Woodcraft *LINK*

#3

Re: New Record Mini Lathe from Woodcraft

georgetroy

>Yes you are doing what I'm trying to change. Setting up my Vicmarc for demos is a tough job. It will only work on my Black & Decker stand. The pulley is open and dangerous even though I have a shield to cover and changing speeds; which I don't very often do is a pain. That's the reason I'm to make a change for my demo lathe. We will see how it works out. I don't like Jet Minis. The tool rest and banjo are an accident waiting to happen. I have seen too much breakage with the poor quality of the tool rest. When I know I will be demoing I carry my own round bar Best tool rest. The 9" works great.

I will show photos later and expressing pros & cons of what I will be doing later. As I stated more than likely I will reduce the length between centers down to approx. 18" not sure. I have seen photos of Records with a 4 pc. pipe leg stand. I don't know if the base of the Record DML 24X/C will work. For $199.00 less than a price of a good chuck I won't have much in it. I must say I'm a lathe junkie this will make 7 lathes plus. My family will have a big tool auction when I die.