Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Couple of wands

Posts

Couple of wands

#1

Couple of wands

Carol in Illinois

>And while I'm at it, here are a couple of recent wands: bocote and maple at the top (with copper and malachite included in the mortise and tenon joint); and silky oak, walnut, and padauk at the bottom (with silver and turquoise included in the mortise...) Again, apologies for the photo...

I've made and given away about 130 wands. The bottom one is mine. These are lots of fun to turn, and more fun to give away. These two are about 11 inches each. My shortest are about 9 inches, and the longest I've turned was 13 1/4 inches. All but two recipients have been adults... I get a kick out of that.

Again, thanks for looking.

Carol in Illinois


img

Re: Couple of wands

#2

Re: Couple of wands

don lewonczyk

>Super, great job. DonL

Re: Couple of wands

#3

Thanks, Don.

Carol in Illinois

>

Re: Couple of wands

#4

Re: Couple of wands

eliot d

>Elegant! You seem to be enjoying a very pure form of turning.

Re: Couple of wands

#5

Re: Couple of wands

Carol in Illinois

>Thanks, Eliot.

These are also my "learning" projects, the first things I turned on my lathe once I got it. It helps that I'm not making something that there are existing standards for - I can make all the errors or wierd decisions I want, without wondering if I'm doing it "right". That gives me freedom to experiment and learn... tho I find so far that the learning happens on every single project, even if it is my 130th wand or 12th pen or 5th bowl... That's one thing I like about turning: I'm never bored and always learning.

Carol

Re: Couple of wands

#6

Re: Couple of wands

Bill Crommett

>Carol: The only "right" is what you want it to be. Consider what you like is right and then the rest of the world just may be wrong.