Re: Photo cube
Fog Tanner
>John,
I have built one of these table top studios. Mine isa selfcontained unit with its own table or riser. I am making the light stands now, along with an overhead boom. The problem I am run into is the reflectors.
I picked up a couple of 30w 5k CFL for the lights, but need to get one more. The only "reflectors" I have are some 8 1/2" type that you would find at a box store. I have used them for working on cars and the like. They just don't seem to reflect the light enough. I have polished one which was a slight improvement. But, all the ones I have are not smooth. There are circular ribs, which I assume is for strength since they are flimsy aluminum.
Do I need to find some real photgraphic reflectors or is the non smooth surface that big of a factor for this usage. I would think that the ribbed surface would difuse the light and not reflect as much, but I am not a photographer. I have found some 12" relectors, but they are not smooth either so I wanted to find out more before wasting the money.
Thanks for any info/opinion you might have on this.
Fog