Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

STUPID CA finish!!!!!!! HATE IT! Please help?

Posts

STUPID CA finish!!!!!!! HATE IT! Please help?

#1

STUPID CA finish!!!!!!! HATE IT! Please help?

Mark Williamson

>I have been trying to get the knack of a CA finish! I don't know what I am doing wrong. Could someone expain how you get such a shiney, evenly smooth finish? I constantly get runs (Not to be confused with getting THE RUNS, although, my end result IS pretty SH*&Y!) and it dosn't ever seem to build up?! I am very frustrated with the end result and more often than not, sanding the darn thing back down and just putting on the Hut's friction polish or just feeling the satisfiying "crunch" under my feet! I would appreciate any help anyone could offer as I am really tired of screwing up so many mini's!

Also, any thoughts on the Hut's liquid friction polish? I would like to know if there is anything that is as easy to apply but more durrable? I would like to turn some more pens (other than acrylic) but I am not trusting that this friction polish is durable enough.

Thanks!

Mark

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#2

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

Tim Grenville-Cleave

>I am also having problems ... (that crunching sound is indeed a stress reliever, that is after I have removed the Da*m thing from whoever or whatever it has become attached to!!!)

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#3

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

Dinyar Chavda

>Look at Russ' Corner on Finishing---I think he has something in there about how to apply CA glue as a finsih. If not, get his video on finishing---it's a bit expensive, but it is extremely detailed, and will answer almost any question that you have on finishing .

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#4

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

JohnKJordan in East TN

>A demonstrator at our club showed how to apply CA to a slowly turning piece by holding a tuff of man-made fiber with hemostats. This gave a beautiful gloss finish. Most of the other methods I've seen involved applying the glue thickly with a finger or rubber glove or paper towel then sanding and polishing to a gloss.

There was discussion about this sometime last year if you want to try searching the archives.

JKJ

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#5

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

Barry Elder

>Life is too short!! There are hundreds of ways to finish pens without hate. Hate is something you don't have time for. "Dream" a finish with anything you have available. They all work for better or worse. Keep turning and learning!

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#6

Been There.....

Jim Shaver Oakville, Ontario

>Hi Mark,

I am not an expert on CA finishes but this is what works for me.

My process for my finish begins after I finish turning I sand the blank with 320-400, then apply Mylands cellulose sealer with the lathe off, let it set up, then sand again with 400. I sand with the lathe at 500 RPM. Once I have done this first step I then start my CA finish.

I use THIN CA, apllied to a shop towel, with the off I quickly apply a very thin coat of CA and let it set up, I have never tried the BLO method, but this works fine for me.

After it is dry I apply a second thin coat of THIN CA, let it set up, then I wet sand with Micro Mesh, 3600-4000-6000-8000-12,000.

I then apply a third and final quick coat of THIN CA, let it set up, then I use Micro Mesh 8000-12,000, then turn the lathe up and polish at 2600 RPM with Novus 2. That's it.

With three thin coats though I have not built up a level clear coat. The finish I have here follows the topography of the wood and that may be a function of quickly applied thin coats of THIN CA.

This is what I do, it works for me.... milage may vary for others using this application.

Take Care,

Jim

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#7

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

RonZ

>I agree that's why I use friction polish [which usually doesn't last a 'long' time. If someone wants a more durable finish, I use Myland's melamine. It is similar to CA but is not supposed to yellow or craze.

I do want to try the CA and check its longevity and durability. Until I get there, life is to short for causing more pain than you have to. I'm als a member of the K.I.S.S. club.

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#8

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

Larry Gottlieb

>You will get many methods of applying CA to small wooden turnings such as pens.

This is mine (presently but subject to change)

After sanding to whatever grit you choose (I choose 800), burnish with a piece of brown paper bag at high speed. Wipe with denatured alcohol. With pen slowly turning and a finger in a small baggy (pen part size) drop ONE (1) drop of thin CA on pen as you rapidly spread over entire length. When dry (less than one minute), repeat brown paper bag high speed burnishing. Apply EEE wax and polish at high speed using a piece of Bounty paper towel . Apply Renaissance wax after sitting overnight.

Simple enough?

Larry

http://webpages.charter.net/lgottlieb2/

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

#9

Re: STUPID CA finish!!!!!!! HATE IT! Please help?

Keith Inscho E. Tenn.

>Here is what I do... sand to 400, Then seal with thin ca and sand to 600, then on the corner of a folded paper towel I place a couple of drops of medium ca and run across the pen. I usually put six coats on then sand back with micromesh to 12000 then buff. I used to wipe with denatured alcohol but found that trapped moisture in the dna would cause the finish to blush if you didn't let if dry long enough. I use a variation of a method shown by Russ Fairfield at http://www.penturners.org/forum/topic.asp?TOPIC_ID=17155

I have tried using BLO but works better for me without.