Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Air Line Filtering

Posts

Air Line Filtering

#1

Air Line Filtering

Tommy Holmes

>I have just bought a 60 gallon air compressor for the shop. I'll be a few weeks getting it hooked up because of the 220 voltage and some other things I need to do before I put it in.

I plan on using it to power a NSK handpiece for piercing/engraving as well as sanding and blowing out hollow forms.

My question is what type filter(s) do I need to put in the line? Do I need to run a separate line or branch with an oil filter or coalescer to the handpiece?

Any and all thoughts are appreciated.

Re: Air Line Filtering

#2

Re: Air Line Filtering

don lewonczyk

>I don't know what your hand piece is but I have a SCM 400,000 rpm operates on max 35PSI. I have a water air seperator regulator combiniation with an extra port to hook into a line for my blow gun but its still reg at 35psi. I have a seperate oil hole on my hand piece and put in a drop every 6 to 8 hours of continuious use, to much oil and it comes out the front of the turbine. Thats about all I can tell you, hope it helps. DonL

Re: Air Line Filtering

#3

Re: Air Line Filtering

Tommy Holmes

>Thanks Don. The NSK is a non-lube engraver so I'm concerned about getting oil in it and fouling it. I didn't mention that the air compressor is splash lubricated so I am concerned about oil mist in the air line. It may be negligible and a regular moisture/particle filter may remove any oil mist that the compressor generates. I just don't know.

Re: Air Line Filtering

#4

Re: Air Line Filtering

don lewonczyk

>That should work but I would put a piece of porous foam like used as an air filter on lawn mowers. Put it in the out line of your seperator and check it after a couple hours use and see if its getting oil on it. If your worried about oil in your turbine hook up to a blow gun and run that for awhile and if no oil your probablly going to be alright with that set up. Good luck. DonL

Re: Air Line Filtering

#5

Re: Air Line Filtering

Tommy Holmes

>Thanks again Don. This sounds like a plan. I'll try it.