Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

wet wood

Posts

wet wood

#1

wet wood

Eric German

>I just got my hands on a chunck of olive wood. I have cut it into 1x6 pen blanks the wood is very wet the tree fell in a storm last week.The vigure in the wood is spectaculer!! What is the best thing to do with the blanks to keep them from cracking.

Re: wet wood

#2

Re: wet wood

Doug Turner

>I like to freeze the blanks for at least 48 hours- this ruptures the wood cell walls and allows the moisture to escape evenly in oily woods. Then I place in the refrigerator for a couple of weeks. At that time the pen blank is ready to turn. This technique also works for green apple wood pen blanks which are also very prone to cracking. I have not tried this on larger wood chunkssuch as bowl blanks.

Re: wet wood

#3

Re: wet wood

Brian Hahn in SW Wisconsin

>Seal them with wax. A wax emulsion like AnchorSeal (green wood sealer, etc.) is the easiest and works well. Dipping them in melted paraffin wax (use a double boiler) is slightly messier method. Sealing them with a couple layers of shellac works almost as well, especially for small blanks.

Re: wet wood

#4

Re: wet wood

Mike Brazeau

>I was told by an exotic wood supplier that olive takes for ever and then some to dry.

Re: wet wood

#5

Re: wet wood

Allen Neighbors

>I'd soak it in soap solution for 48 hours, then stick it in one of the refer kilns wrapped in brown paper. And I'd change the paper daily. Pen blanks should dry in a couple of weeks.

Just depends on how bad you want the wood.

Re: wet wood

#6

freezing?

JohnKJordan in East TN

>>...I like to freeze the blanks for at least 48 hours

Very interesting - I've never heard of this! Do you have more information, perhaps a reference I can read? Do you know how it works with thicker wood, say 2x2 stock?

Does the freezer temperature have to be significantly below 32F? I'm wondering if the water in the cells may have something in solution which lowers the freezing point.

If freezing ruptures the cell walls, would not extended sub-zero outside temperatures damage the tree?

JKJ

Re: wet wood

#7

Re: wet wood

eric German

>Ok I think I will Freez um, givem a soapy bath, boil them, and wax some see which works best. thanks for the tips

Re: wet wood

#8

Re: wet wood

Jim Reasoner

>I had some green mulberry. Cut into 1x6 blanks. Microwaved 3 times at half power for 30-40 seconds(let them cool after each heating). Then stored them in cardboard box, covered them with lathe shavings for a month and turned. There was virtually no warping or cracking. I don't know if different woods require different treatment.

Re: wet wood

#9

Re: wet wood

Colin Spencer

>Eric

Olive takes a lot longer than normal woods to dry. Living in Spain I get some direct when local trees are cut down BUT due to the drying time I buy most of it kiln dried from a local wood yard. Be prepared to loose about 50% due to cracks and checks. In drying it moves a lot. I have tried alcohol, freezing and boiling with none being particularly successful (must build a kiln from an old freezer). I just cut it and leave it a couple of years and even then it is not always dry. Be aware that the sap will rust anything steel on contact, SWMBO may not like a rusty freezer.