Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Wine Stopper Part Supply - Contact

Posts

Wine Stopper Part Supply - Contact

#1

Wine Stopper Part Supply - Contact

Greg Deavers

>I am needing a large (for me) supply of chrome droplet wine stoppers.

Would anyone have a contact for purchasing these direct from the factory in bulk>? Onsie-Twosie + shipping from Turning supply house is getting too expensive.

I am selling 10-15 ahead of what I have time to make.

Any ideas would certainly be appreciated.

Sincerely,

Greg Deavers

Re: Wine Stopper Part Supply - Contact

#2

Re: Wine Stopper Part Supply - Contact

Carole Valentine

>I know you said chrome droplet, but you might want to try Ruth Niles' stainless steel stoppers. They are very fine quality and will never pit like chrome.

Re: Wine Stopper Part Supply - Contact

#3

Re: Wine Stopper Part Supply - Contact

Halsey

>Ruth's are very good. Halsey

Re: Wine Stopper Part Supply - Contact

#4

And made here - not in China!

Carole Valentine

>

Re: Wine Stopper Part Supply - Contact

#5

Re: Wine Stopper Part Supply - Contact *LINK*

JohnKJordan in East TN

>Greg, I can't answer your question. But If you are interested in bumping up your quality I also vouch for Ruth Niles stoppers. Next to the crome there is no comparison. They even feel elegant.

I've only make a few so far for presents but they were accepted with awe. They do cost more, but I imagine you could sell them for more.

JKJ


Niles stoppers

Re: Wine Stopper Part Supply - Contact

#6

Re: Wine Stopper Part Supply - Contact

Molly Winton

>I'll add my endorsement to Ruth's stoppers. Not only are they made here in the U.S. (all other on the market that I know of are manufactured in China), but they are competitively priced to the chrome, especially when bought in bulk. Buying Ruth's also supports a single business owner as opposed to a large retailer.

Disclaimer: Just a satisfied customer (and personal friend) of Ruth.

Re: Wine Stopper Part Supply - Contact

#7

Re: Wine Stopper Part Supply - Contact

Jim Shaver Oakville, Ontario

>Hi Greg,

Another vote for Ruth's stainless steel stoppers. I found that selling them was a straight forward exercise with customers once they knew it was stainless steel... that and the way they sit low in a bottle (about 1/8" shows) make them a nice choice.

Photobucket

Take Care,

Jim

Re: Wine Stopper Part Supply - Contact

#8

Re: Wine Stopper Part Supply - Contact

Texian

>And if you just have to have that "chrome" look, Ruth's stoppers can be easily polished to a mirror finish. Just order them with the o-rings not installed (but included in the package).

Re: Wine Stopper Part Supply - Contact

#9

Me Too

Barbara Gill, Remlik VA

>I sold more wine stoppers this year at Christmas than ever before and charged more for them too. Rut's stoppers are low profile, high quality and as was said, will not pit. When my personal chrome stoppers started pitting years ago I decided I didn't want to be selling a product that would end up looking like a junk yard reject. I switched to the neoprene until Ruth developed her product.

I wouldn't even consider any other. She designed and developed her product herself. Unless I am very wrong, Ruth marketed the first stainless stopper.

Re: Wine Stopper Part Supply - Contact

#10

Re: Wine Stopper Part Supply - Contact

Tim Grenville-Cleave

>Go with Ruth's Stoppers, I have not bought many but I am happy to pay for shipment to the UK as I have not found anything like the quality anywhere else. Brilliant quality, brilliant service you won't regret it 'nuff said!!

Re: Wine Stopper Part Supply - Contact

#11

Re: Wine Stopper Part Supply - Contact

Ken George

>Just one more endorsement for the stainless stoppers from Ruth Niles. I order them without o-rings and polish them with a set of

Beall tripoli and white diamond wheels that result in a near chrome like finish. These wheels are not used for wood as they turn quite black quickly and I worry that the black may transfer to the wood.


img

Re: Wine Stopper Part Supply - Contact

#12

It Does-DAMHIKT

Barbara Gill, Remlik VA

>

Re: Wine Stopper Part Supply - Contact

#13

Dick Hines

Re: Me Too

Dick Hines

>Has anyone had any trouble with them fitting some bottles? I heard at a club meeting. I don't do many stoppers so don't go by anything I say.

Re: Wine Stopper Part Supply - Contact

#14

What do you charge foe stoppers?

Norm Smith

>I priced Ruths stoppers when she first put them on the market and found that I could bye the chrome stoppers for about 60% of her price when buying 50 to 100 at a time. I charge $25 each. I dont know if I could recover the additional cost. What do you guys charge for stoppers?

I havent done a price comparison lately.

No offence intended Ruth.

Norm

Re: Wine Stopper Part Supply - Contact

#15

Re: What do you charge foe stoppers?

Barbara Gill, Remlik VA

>You are right however you get what you pay for. In my case I didn't want a poor product to reflect poorly on me. I was not very happy when my chrome stoppers started corroding from red wine; especially when I let the supplier know and nothing was done.

If someone is only going to display the stopper and not use it then the quality is not as important. Another feature I like about Ruth's design is the low profile. I realized that to make a top in proportion with all of the chrome sticking out of a bottle many stoppers ended up too high to use in a bottle under the cabinet. For those white wine drinkers, the bottle ended up too tall for most refrigerators.

BTW, I charge $27.50 for my stoppers. Most are made from highly figured domestic wood that is too small for me to use for anything else. I do buy exotics occasionally just for the fun of seeing what they look like.

Re: Wine Stopper Part Supply - Contact

#16

No

Barbara Gill, Remlik VA

>I have used them in many different wine bottles as well as vinegar and olive oil so far they have fit all. Ruth could probably address this.

Re: Wine Stopper Part Supply - Contact

#17

Re: Wine Stopper Part Supply - Contact

Bruce Lane

>Not to hijack your thread, but...

...I am going to give these a try. I have had to replace several of the chrome stoppers. For me, it will less expensive with Ruth's stoppers. Are there any opinions as to the best ones to use? (Threaded or non-treaded)

Thanks,

Bruce

Re: Wine Stopper Part Supply - Contact

#18

Re: Wine Stopper Part Supply - Contact

Stuart Johnson

>I like the threaded ones. I use a threaded screw (bolt) chuck for turning and the stopper then threads in the hole. I do add a few drops of CA to make sure they stay threaded.

Re: Wine Stopper Part Supply - Contact

#19

Re: It Does-DAMHIKT

Mark Williamson

>I have to know...

What does the "DAMHIKT" mean?

Mark

Re: Wine Stopper Part Supply - Contact

#20

Don't ask me how I know this.

HeatherA in Alaska

>As in "been there, done that"

Heather

Re: Wine Stopper Part Supply - Contact

#21

Re: It depends on what you want to sell

Russ Fairfield

>If you want to sell a stopper that is shiny when new, then use the chrome.

If you want to sell a stopper that fits the bottles, doesn't have a plating that flakes off, and looks good forever, then pay the extra price for Ruth's plugs.

If you want to sell a cheap stopper, then use corks.

If you want to sell a really cheap stopper, then turn a taper on a piece of soft Pine.

Re: Wine Stopper Part Supply - Contact

#22

Dick, so far

Ruth Niles

>I've had only one report of my stopper not fitting a bottle, it was a wine from Venezuela and it turned out the bottle was not perfectly round. Also Carole Valentine had called me once saying she had a bottle of ? (a known brand), the stopper didn't fit. She made the sacrifice to finish that bottle so she could open the second, same wine, same brand and the stopper fit perfect.

Other than these two instances, no one has reported to me of any other bottles it didn't fit.

Re: Wine Stopper Part Supply - Contact

#23

Re: Don't ask me how I know this.

Mark Williamson

>Gotcha! Thank you Heather! I hate when I have to ask stupid questions! LOL

Alaska! Gee, is it cold up there? It is supposed to be in the low 60's here in Virginia Monday! I can't wait!

Mark

Re: Wine Stopper Part Supply - Contact

#24

Dick Hines

Re: Dick, so far

Dick Hines

>Thanks Ruth. I only heard of one person that had the

problem.. It could have been to much of what came out of the bottle.

Re: Wine Stopper Part Supply - Contact

#25

All the hipe...

Mark Williamson

>I have never turned a wine stopper, so I had to go and check out what all the hipe is! I just had to say that I love your tee shirts! (Great since of humor!) I will one of these days turn some stopper's and when I do, I will be ordering from you! :)

Mark Williamson