Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Vacuum Pump

Posts

Vacuum Pump

#1

Vacuum Pump

Peter Toch

>I have heard that some folks use a compressor unit from an old air conditioner or refrigerator as the vacuum pump for a vacuum chucking system. Has anyone actually done this and how well does it work? What does one have to watch out for?

Thanks, Peter Toch

Re: Vacuum Pump

#2

Re: Vacuum Pump

Randy Johnson Connersville, IN

>I have three salvaged compressors and I've run the conduit and mounted the disconnect but that's as far as I've got. The hold up for me is the gauge and the adaptor to go through the headstock.

In addition to any useful replies you might get try the link. Click on vacuum sys part 1& 2

Re: Vacuum Pump

#3

Bill Blasic

Re: Vacuum Pump

Bill Blasic

>At the next meeting of the Presque Isle Woodturners in Erie, PA on the 6th of February one of the things we are doing is making vacuum pumps from old refrigerators. I have seen the pumps which come from an appliance store after they take the freon or what ever out. About the only thing that you have to worry about is making sure you add oil every once in awhile and since it will mist oil you have to make an oil filter of some sort so your not breathing this oil vapor. These are very quiet and pull a good vacuum. It is going to be fun putting these together.

Re: Vacuum Pump

#4

Re: Vacuum Pump

Bill Howatt

>I first used an old compressor from a dehumidifier. It worked well and pulled at least 26" of vacuum on a tight system. The weakness is in the pumping speed - it is slow and thus not tolerant of leaks. A small leak can quickly reduce the vacuum. Not all leaks are in your piping, couplers and the bowl/vacuum chuck interface. Some woods have leakage right through the wood (especially end-grain turnings). This can be helped by applying finish to the inside of the bowl before finishing the bottom with the vacuum chuck.

Right now I am using an old refrigeration compressor but it is a fairly large 2 cylinder single-stage unit that was used years ago on a farm to chill a water tank that cans of fresh milk were put in to cool down.

Bill

Re: Vacuum Pump

#5

I should never.... *LINK*

Randy Johnson Connersville, IN

>post something right before I run out the door in the morning.

Here is the link.


http://www.cnew.org/tips_techniques/tipsntechniques.htm