Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Modified Homemade Buffing System

Posts

Modified Homemade Buffing System

#1

Modified Homemade Buffing System

Allen Neighbors

>This pic is a shot of my buffing motor. This motor got too hot when I had it on the little Vicmarc, so I decided to use it as a buffing motor. It's not on long enough to get hot, now... works well.

I mounted the motor on a corner of a table, and bought an extra long mandrel for the 5/8" motor shaft, which allows me to buff the insides of larger bowls without hitting anything. The piece of carpet is insurance.

I put a piece of pipe insulation around the long mandrel and duct tape over that, which allows me to grab the shaft to stop the motor instantly, instead of having to wait for it to wind down.

I epoxied a large washer behind the nut, which gives me a good gripping surface to loosen the buffs by hand.


img

Re: Modified Homemade Buffing System

#2

Modified Buffing Wheels

Allen Neighbors

>This is a shot of the wheels in a large plastic storage container, which keeps the shavings and dust out of them. You can see the 1/2" CPVC pipe I CAed into the center of the buffing wheels, to make them slide on and off the shaft easier.

The pink Tripoli wheel is felt. The White Diamond and Beeswax wheels are 35/65 cotton/polyester denim. The Carnauba wheel is from 100% cotton denim. The little wheel in the near corner is from cotton flannel. There's a hard cloth wheel under that that I use Emory on to buff homemade tool shafts. The grungy looking things in the left corner of the box are my answer to the round buffs (that don't work worth a hoot). (I've gotta try something else.)

The little gizmo in the upper right corner, with the wooden tenon mount, I use on my little Vicmarc to buff the inside of boxes.


img

Re: Modified Homemade Buffing System

#3

Re: Modified Buffing Wheels

Texian

>Allen,

Did you make the buffing wheels? If so, please tell us what diameter and how many layers of fabric used?

Currently using "experimental" 6" wheel from 25 layers of cotton sheet, with white polishing compound. Works surprisingly well, but could be better.

Re: Modified Homemade Buffing System

#4

Re: Modified Buffing Wheels

Texian

>As you were. Just found the other thread w/ descriptions of buffing wheels. Thanks for the info.