Best Book(s) for a total Newbie
Dave Winters
>I've been commisioned to give a few lessons to a never-ever beginner, and was wondering what the best introductory turning books are.
What are your favorites?
Thanks, as always.
Knowledge You Can Build On — Est. 1998
Best Book(s) for a total Newbie
Dave Winters
>I've been commisioned to give a few lessons to a never-ever beginner, and was wondering what the best introductory turning books are.
What are your favorites?
Thanks, as always.
Re: Best Book(s) for a total Newbie
Mark Paulley
>Dave,
Do not foget the DVD's, they really help alot too! I believe you may need to narrow your search at first: bowls?, pens?, etc.
Last but not least get with a mentor in your local club to help you with books, DVD's, tool selection. Our club even has a library to borrow DVD's to watch.
Hope this helps a little
Mark
Re: Best Book(s) for a total Newbie
GaryG in MD
>A good book is "Turning Green Wood" by Michael O'Donnell.
A good DVD is "Turned Bowls Made Easy" by Bill Grumbine. ...Gary
Re: Best Book(s) for a total Newbie
Martin Harris
>I started woodturning last summer and the two sources I found most useful were "Turning Green Wood" by Michael O'Donnell and the "Open Bowls" DVD by David Ellsworth.
Artistic Woodturning by Dale Nish
Richard Allen
>Dale Nish had a wonderful book for woodturning called Creative Woodturning ISBN 0-8425-0469-9 or 0-8425-1557-7 or 0-8425-0472-9. That book is out of print but available in the used book market.
There are also some books which help to expand the vision of woodturners. This expansion should start near the start of learning woodturning before a new woodturner get to involved technique. Expand the limits before the limits surround the new woodturner.
To this end I would recommend two additional books:
Appearance and Reality by Stephen Hogbin ISBN 1-892836-05-X
Photo Impressionism and the Subjective Image by Freeman Patterson and Andre Gallant ISBN 1-55263-327-6
Re: Best Book(s) for a total Newbie *LINK*
JohnKJordan in East TN
>By far the best books I've found (and I've bought as many as I could find) are
Turning Wood, by Richard Raffan
The Fundamentals of Woodturning, by Mike Darlow
I read and studied these repeatedly and did the suggested exercises when starting on the lathe. As I mentioned in another recent thread, books can contain so much more information than will possibly fit on a DVD or video.
Re: Best Book(s) for a total Newbie
JL
>"Woodturning: A Foundation Course" by Keith Rowley.
Raffan's three volume set.
Ernie Conover's - "The Lathe Book".
And many others.
Re: Best Book(s) for a total Newbie
HarryB
>I recommend "Woodturning: A Foundation Course" by Keith Rowley. But use this book at the lathe. It is not for browsing and looking at the pictures. Mr. Rowley will help you though the beginnings of turning. Use it as a textbook and work your way through the examples. You don't have to make all of his projects but make something like them. When you reach the last page, you are a turner.
you rock, Rick
GaryG in MD
>I got the Hogbin on Amazon for $2. Cool.
I'll pass on the second one. ...Gary
Re: Best Book(s) for a total Newbie
Peter Charles Fagg (UK)
>I second the reply by HarryB, the foundation course book is almost THE bible of woodturning in my shop.
As suggested it should be used with the lathe, that is what I did all those years ago, propped it up and followed the suggestions.
Excellent beginners book and one that should be in everyones library!
Regards, Peter.