Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Expensive Wood I Don't Need.....

Posts

Expensive Wood I Don't Need.....

#1

Expensive Wood I Don't Need.....

Wally Dickerman in Arizona

>I'm moving things around in my small shop to get ready for my new lathe, which is scheduled to arrive on Tuesday. I have lots of wood taking up space in one end of my shop. A couple of hundred bowl blanks stacked and stickered. All figured wood. That's good. However, I have lots of exotic wood that I've gathered over the years. I used to do some segmenting but haven't for years.

I've bought most of it when I'd see it on sale or just couldn't resist a pretty piece of wood. Until today I had no idea I had so much on hand. I'm sure that I have no use for most of it.

I have purpleheart, bloodwood, Bolivian rosewood, koa, very curly maple, ebony, wenge, kingwood, parakingwood and more. Nearly all of this is in thin pieces, ranging from 1/8 inch to 1/2 inch. Some 3/4 inch. Some are as large as 4 inches wide and 4 ft. long, but most are smaller, some much smaller. I have no idea why I have so much of the 1/8th inch stuff.

I've looked at today's prices on some of this. I'm sure that even though it doesn't take up a lot of space it's worth several thousand dollars.

What the heck am I going to do with it?

Wally

Re: Expensive Wood I Don't Need.....

#2

Keith Tompkins

Re: Expensive Wood I Don't Need.....

Keith Tompkins

>Hey Wally, post it on ebay! I'll post a pic soon of a piece I'm making from exotic "scrap"...if I don't blow it up :) Redheart and ebony!

Re: Expensive Wood I Don't Need.....

#3

Re: Expensive Wood I Don't Need.....

tek-Brunswick, Ohio

>Save a little to send to Virginia. It's close to Valentine's day and we know what that means!

Re: Expensive Wood I Don't Need.....

#4

Steven Antonucci

Take a picture just in case you do blow it up!

steve antonucci

>If I have a nickel for every piece that I've lost, I'd jingle when I walked...

Steve

Re: Expensive Wood I Don't Need.....

#5

Re: Expensive Wood I Don't Need.....

Barry Irby

>Wally, I'll give you a couple of hundred bucks for it site unseen. I'd give you more, but I'm pretty much broke and don't actually need more wood.

Why don't you find a way to donate it to some sort of non profit and take it off your taxes.

Or give it to one of the turners here that does segmented work in return for one of their pieces, made form you wood.

Or sell it on E-Bay.

Or donate it to your turning club for an auction.

Re: Expensive Wood I Don't Need.....

#6

Give it Away?.....

Wally Dickerman in Arizona

>I've given away a lot of wood but not when it's worth that much....

Wally

Re: Expensive Wood I Don't Need.....

#7

carl

Re: Give it Away?.....

carl

>Hi, if ya want you can send me a little,I`ll buy some or make you a nice pen or both..I can use some 3/4 or i can use 3/8.. Carl

Re: Expensive Wood I Don't Need.....

#8

Sell It Wally

Barbara Gill, Remlik VA

>

Re: Expensive Wood I Don't Need.....

#9

Re: Expensive Wood I Don't Need.....

Gary Ljostad

>Wally, I would like to see what you would make with them. Sometimes a change of direction is good for a while. I have never seen a Wally Dickerman segmented piece.

Re: Expensive Wood I Don't Need.....

#10

Re: Expensive Wood I Don't Need.....

Wally Dickerman in Arizona

>After looking over my stash of exotics and setting aside some that I'll use for collars, finials etc. I think that I'll sort out some of the larger pieces and take them to a local woodworkers store. I should be able to work out a trade for some new turning equipment that I can't get along without. I know that I won't get market value but then for some of it I probably didn't pay much. I'll probably donate some for a future club auction.

Now I have a LH Nichols lathe to sell.

Wally

Re: Expensive Wood I Don't Need.....

#11

Re: Expensive Wood I Don't Need.....

Mark Williamson

>I think I need to change my name to Mark Memorialday! Maybe I would get some gift boxes in the mail each May?! LOL

If you don't end up selling to the local wood store, I turn miniatures as well and would be willing to buy at least a little bit from you! I feel like I am a non-profit organization this time of year, but if you still have anything around in the spring when business picks back up I would love to purchase a little bit from you!

Mark

Re: Expensive Wood I Don't Need.....

#12

Expensive Wood - knife maker

JohnKJordan in East TN

>Wally,

I forgot I meant to mention that knife makers love thin pieces of exotic and nicely figured domestic wood for handles. A few years ago at the annual homecoming festival at the Museum of Appalachia near here I watched a knife maker at work. I came back the next day and gave him a small box full of exotic offcuts, thin, narrow pieces of little use to me. He was nearly speechless!

If you have knifemakers in your area, you may well be able to sell your excess wood.

JKJ