Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Question to local turning club at Indy Show

Posts

Question to local turning club at Indy Show

#1

Question to local turning club at Indy Show

in_parrothead

>I attended the Woodworking show in Indy on Saturday. At the show the local wood turning club had a booth setup doing demos's. I noticed that one of the turners was using an articulated type arm to hollow a bowl. It looked like it was mounted to the bed of the lathe and used no other tool rest. It also had a laser that shoed the location of the tip.

I should have asked but did not, can any of you from the turning club tell me what kind of tool this was and where they can be purchased?

Thanks, Mike

Re: Question to local turning club at Indy Show

#2

Re: Question to local turning club at Indy Show

Cyril Griesbach

>It sounds like the hollowing system you saw was the Kobra hollowing system which is a new product and is being produced by some of the members of that club. It does use a tool rest that is part of the design and you can learn more about it from Ray Thompson at rayt@indy.net. The company is called Indiana Innovators.

Re: Question to local turning club at Indy Show

#3

Re: Question to local turning club at Indy Show

bowlman

>Cyril is right on with his answer. There are actually 2 models: 1 for lathes with a 12" or less swing as was demostrated on a Jet Mini. This is the green Kobra. The red Kobra is for larger lathes. I have used the Kobras only a little, but compared to other systems, this is my favorite ... and no, I have no financial connection to Indiana Innovators. It cuts so easy its nearly indescribable. Just keep the cutter at absolute dead center and everything else is a dream. The articulated design is sweet!

Re: Question to local turning club at Indy Show

#4

email sent, Ray

Ray Thompson - Middletown,IN

>

Re: Question to local turning club at Indy Show

#5

I have used

Terry Quiram, Roanoke Illinois

>I received my Kobra a little over a week ago. I have the green version. It is mounted to my Oneway 12/24. I have been successful in creating one marginal hollow form and 4 disasters. The disasters are no fault of the tool buy rather my learning curve and experimentation with different boring bar configurations. I have fallen in love with my Kobra and when I have something worthwhile to show I will post a pic.

Its a very well thought out tool with high tolerance machining for a very smooth operation.

No turning today, ITS FOOTBALL!!!!!!!!!

Terry

Re: Question to local turning club at Indy Show

#6

Re: Korba?

Bob Rogne

>What is it? Is it a improvement of the Elbo? With a bad shoulder I need help when hollowing.

Bob R WestMac Turnings

Re: Question to local turning club at Indy Show

#7

Re: Korba?

Carol - now in NC Nebraska

>Its "Kobra", as in fast striking creepy crawly thing. :)

Actually it is one of the smoothest, easiest to use, articulated captured tool rigs out there. It was developed by some really nice guys, who are very knowledgeable in the engineering world. They also happen to be woodturners, so they know the idiosyncrasies of presenting a cutting edge to wood fibers to effect a smooth extremely controllable cut. You literally can control the cutter with two fingers!

I got my hands on one at Indy Fest. It is the coolest. The guys are gearing up for production in numbers. A few early birds got a rig and are now quite understandably touting its features.

While it can be used by anyone who turns, it is especially helpful to those with hand strength problems, standing at the lathe problems, and other physical handicaps that may now preclude them from turning as much as they would like to. Works real well with us lady turners who have trouble with tool control. It is also the greatest for beginners, especially with hollow forms. Not that you can't get into trouble. You can. But you will have to work at it!

There is much, much more. Stay tuned.

I hope to be able to get one soon.

Disclaimer: I have no fiscal involvement with this project. I don't make a dime for my pithy words. I just was fortunate enough to see this early on.

Re: Question to local turning club at Indy Show

#8

Look for am email from me Terry.

keith zimmerman, Normal, IL

>I want to come up and check out that Kobra you got.

keith

Re: Question to local turning club at Indy Show

#9

Re: Korba?

Dave L

>Is there a web site where one could do a review of the product?

Re: Question to local turning club at Indy Show

#10

Re: Korba?

Carol - now in NC Nebraska

>Not yet, to my knowledge.

Re: Question to local turning club at Indy Show

#11

Re: Not yet, but there will be soon. Meanwhile,...

Al Crandall -NW of Indy-

>Until the web site is completed, you can find a slew of pictures in the archives of our local turning club, the Central Indiana Chapter of the American Association of Woodturners. (I know, Whew!!!) Try CICAAW.org for the club site or just paste this into your browser window to go directly to the meeting pictures of our demonstration of the red Kobra and green Kobra Jr.:

http://www.cicaaw.org/image/tid/166?PHPSESSID=3e951d46d8f273008ad37b18058c89c6

Thanks, Al.