Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Something new for me

Posts

Something new for me

#1

Steven Antonucci

Something new for me

steve antonucci

>I've been messing around with a bunch of new techniques, and I've had an idea for a while, but no means of executing it until the last AAW magazine came out. It gave me a way of trying something, and here is v1.0

I'm on the fence and will listen to any and all opinions: I'm considering either a) leaving it alone b.) gold leafing the middle band c.) texturing with a "branding iron".

What would you do?

Steven


img

Re: Something new for me

#2

Re: Something new for me

Brian McInturff

>If I was good at texturing then I think I would texture the outer band. But I also like it the way that it is. Nice work!

Re: Something new for me

#3

Re: Something new for me

Bill Crommett

>Why mess with success ?

Re: Something new for me

#4

Re: Something new for me

Bruce Forrest

>Texture and blacken the band around the shiny bits. You need to increase the contrast between the silver and the surroundings.

Re: Something new for me

#5

Re: Something new for me

Mark Williamson

>I have never tried any texuring but I don't think it would look bad around the mother of pearl. (I think that is what it is?) If it were me, I would leave it just the way it is! I think it is awesome!

Beautiful work!

Mark

Re: Something new for me

#6

Forget doing anything else...

Allen Neighbors

>to V 1.0. This is gorgeous! Just like it is! Make another one to do more to... that way if you don't like what you did, you won't have messed up an already winning combination!

Re: Something new for me

#7

OK, Steve; I'll ask...

GaryG in MD

>What does it say? ;-) ...Gary

P.S. Nice work.

Re: Something new for me

#8

Re: Something new for me

Cyril Griesbach

>Steve, You asked and I'm going to go against the flow here. First off, you have a beautiful piece of wood with wonderful grain and figure. And you've done a nice job with a pleasing form. I'm not at all sure it needs any enhancement. While I can see that your pyrography and inlay are well done, the pyrography seems to be without a plan and appears "helter skelter" to me. The inlay stops my eye from going directly to the bowl portion with that nice grain and figure and the contrast that developes simply detracts from realizing what a great piece this could be. One embelishment or the other on the rim might have worked but both of them with this beautiful wood just argue.

Re: Something new for me

#9

Steven Antonucci

I agree 100%

steve antonucci

>I have a texture that I might use, and I think blackening will bring out the inlay much better.

Steve

Re: Something new for me

#10

Steven Antonucci

Abalone Shell beads (Ebay $1+S&H)

steve antonucci

>

Re: Something new for me

#11

That's why it needs

Bruce Forrest

>texture and blackening around the shiny inlay. To blend these two embellishments together.

Re: Something new for me

#12

Steven Antonucci

You'll have to take a cryptology class :-)

steve antonucci

>All I'll say is that it's based on the english alphabet...

Steve

Re: Something new for me

#13

Steven Antonucci

I should have blackened the inner band first

steve antonucci

>I debated a few different layouts before I decided on this one (wife's idea).

The next one will probably have a bit more planning involved. I think the "lettering" is out of scale too, but it was what I had available. Still looking for a thinner wire that can take the heat of a torch without melting. Was playing around with jewelry making posts last night- hit and miss.

Steve

Re: Something new for me

#14

Re: Something new for me

Mark Williamson

>That's what it is that is throwing it off...

The two shell inlays at the bottom left of the picture (7 o' clock) are too close together. The rest seem to be evenly spaced until you get to those. I still think it's really beautiful though! :) I didn't think the pyrographic symbols seemed hap hazard at all. It almost seems like kryptonian writing or something! (I thought that was the coolest part. The shell inlay does seem a bit big but not enough to downplay the rest of the bowl.

My three cents.

Mark

Re: Something new for me

#15

Steven Antonucci

I wasn't going for precision

steve antonucci

>but you're right. There are a couple that are eyeballed completely wrong, and I see it now that the epoxy has dried. If you ran your hand over the top, you'd also notice that the inlays are slightly raised and far from perfect.

Steven

Re: Something new for me

#16

Steven Antonucci

The backstory...

steve antonucci

>I began thinking about this based upon a lifelong interest in archeology. Part of me finds it fascinating to be able to retell ancient stories of people from a forgotten civilization, and another part of me finds it somewhat disconcerting that I may be dug up by a future archeologist in the name of science.

I began working a concept: what if archeologists came across a completely new civilization- one that had never been found? How might we go about reconstructing the past? We have a single item (so far), and we need to start understanding the clues it provides about the people that made it. From that, we will be able to paint a picture of their society, intelligence, culture. Man has always advanced- but what if archeology found artifacts from a civilization that was more advanced than our own? How would we go about the learning process when we had none of our own experience to build upon?

And what if "they" didn't want us to know?

Stay tuned...

Steven

Re: Something new for me

#17

Re: Something new for me

Don Orr

>OK, a few observations from the seat of my pants. Overall I like it very much. The wood certainly stands on it own. The pyrography is crisp and clean and interesting, I like that it is not a repetitive pattern. The abalone is beautiful, but maybe the pieces are too big. I think you don't need to overdo enhancements. There is a fine line between just right and too much. I think you are just at the line here. Less would have felt lacking and more would overwelm the piece. The wood at the outermost rim acts as a frame for the enhancements which in turn act as a frame for the bowl. My eye wanders all around this piece with interest, not distraction. This has the balance and harmony of a well thought out piece and the execution as well. This series has tremendous potential and I look forward to its evolution.

Just my $.02. You asked for it, you got it.

Re: Something new for me

#18

Steven Antonucci

Just for giggles, this was an offcut...

steve antonucci

>appreciate the commentary...

Steve

Re: Something new for me

#19

the piece doesn't work for me

Buddy

>You have round dots equi-spaced on a round band that has a width almost the same as another round band around a round bowl.

The reason it doesn't work for me is that everything is too similar in size, proportion and shape.

Why not play around with breaking up the repetition?

Re: Something new for me

#20

Steven Antonucci

Actually, it might just not be the best picture

steve antonucci

>The inner band is considerably smaller than the outer band where the "message" has been inscribed. The spacing of the abalone inlay was done by eyeball, and is far from perfect?

I think of this as a proof of concept. More "experiments" coming.

Steve

Re: Something new for me

#21

Re: Actually, it might just not be the best pictur

Bill Crommett

>The whole thread is an interesting tutorial on design.

Re: Something new for me

#22

Re: You'll have to take a cryptology class :-)

Steve Russell

>Hello Steve,

My brother was Navy Crypto for many years. I'll give him a picture and let him see if he can "break" the code. He did this for about 20 years and was good at it... Maybe he can run it through a Cray Super Computer. :-)

Steve Russell

The Woodlands, Texas

Re: Something new for me

#23

I can read that....

Allen Neighbors

>because my Grandson writes that language very well. It says, "My Grandpa is the bestest, ever, and I want to grow up to be just like him!" :)

Re: Something new for me

#24

Bill, how good are you at...

Allen Neighbors

>reading Cuniearabic Greek? LOL

Re: Something new for me

#25

Steven Antonucci

That won't help you... :-)

steve antonucci

>It is a simple substitution for the english alphabet, but it's not based upon anything historically accurate. I made it up.

That being said, if you can solve the puzzles in the newspapers, you can solve this one.

Steven