Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Free or inexpensive dry wood

Posts

Free or inexpensive dry wood

#1

Free or inexpensive dry wood

Stuart Johnson

>There have been several references by MWWoodWorks (I sure do like real names) about the lack of wood. Most of us are aware of tree trimmers or landscape companies but here are a couple you might not have thought about:

1. Craiglist free section usually has free firewood listed. It might be junk but worth a look.

2. Second hand furniture and thrift shops will often have beat up tables, bookcases or other items at very low prices. You might find some nice Cherry, Mahogany or Oak at a very low board foot price. Ask if they have any unmatched table leaves.

Re: Free or inexpensive dry wood

#2

Re: Free or inexpensive dry wood

JohnKJordan in East TN

>Some other things:

I used to get mahogany and other interesting wood from a Honda motorcycle shop - they got motorcycles from overseas and the pallets were made of what ever wood was handy. Not long ago I got a pallet of some very interesting reddish-brown wood from my local Kubota tractor dealer.

When I cut and split firewood, I keep an eye out for crotches, spalting, and other interesting figure. If I didn't use firewood and needed turning wood, I might offer to help a neighbor cut and split wood in exchange for some pieces.

Stop along the road when you see someone cutting a tree. You can almost always get a piece or two or many and sometimes you hit the jackpot.

Ask at your local sawmill. One local mill owner saves burls for woodturners. They were worthless to him. He gave me one nice cherry burl and I declined another because it was too big for me to handle at the time.

Sawmills also have piles of scrap and some of it is pretty good. A small mill operator might let you have all you want. (I have my own sawmill now and my neighbors use the scraps for camping and woodstoves.) I once got some huge blocks of free wood from a large sawmill. It never hurts to ask.

Ask around remodeling sites. I recently got a dry mahogany beam 8"x9"x96". It had been used as a mantle since the early '70s.

Old counter tops made from hard maple are a great source of 1.5" turning blanks.

Make intersting little things and give them to friends and tell them you are always on the lookout for pieces of wood. One guy bought offcuts from a tropical wood dealer in California and shipped them to me!! Another brought pieces of wood back from a mission trip to South America.

Flooring installers always have scrap. I've gotten some free and useful pieces of jatoba and other woods in sizes thick enough for finials, ornaments, and finger tops.

Join a woodturning club. Members bring wood to almost every club meeting here and give them away or auction. Many people generously bring wood when they know a beginner needs some. (Most who have been turning for a while seem to have too much wood.)

JKJ

Re: Free or inexpensive dry wood

#3

Re: Free or inexpensive dry wood

MWWoodWorks

>I had never thought of checking the thrift stores! Truthfully I hadn't thought about the ladscape companies either! LOL I haven't been doing this long! I'm learnin'! :) Mark, Mark is the name! hehe

Mark Williamson, hence the "MW" of "MWWoodworks". :)

No need to google, I am a nobody! LOL

I am slowly building an arsenal of good woods to turn, as I learn what woods are worth turning. LOL Up untill about a year ago, I didn't have anywhere to store anything so when I did see something worth a darn, I had to pass it up. Now that I have several lean-to's and out buildings, I am on the hunt! he he

Thank you for the advice on places to find wood! much appreciated!

Re: Free or inexpensive dry wood

#4

Re: Free or inexpensive dry wood

Carole Valentine

>Mark, you can go into "edit profile" and put your name in there.

Did you make it to the Richmond meeting...or has the Jan. one not happened yet?

Re: Free or inexpensive dry wood

#5

Re: Free or inexpensive dry wood

Ruth Niles

>I get cut offs at a local saw mill, they only use hardwood and cut it for pallets or exporting. These are the pieces they put through the chipper, they sell the chips to horse farms. All the boards are 2" to 2 1/4" thick anywhere from 8" to 12" wide and all about 3' long. I used all of these boards for salad bowls of which I have one.......for my cereal. : )


img

Re: Free or inexpensive dry wood

#6

Re: Free or inexpensive dry wood

Jerry Whitaker

>A friend of mine owns a sawmill about 40 miles from me. I called him last Friday just to chat. He told me that the highway department is getting ready to widen a strip of hiway and it just so happens that there are over 100 old Mesquite trees in the way. Some of them are over 100 years old and some are burl from the ground up to 6 or 8 feet high and have trunks between 24 and 30 in. in diameter. He told me that if I would meet him at the site on Sunday, that I could have all the wood I wanted. I loaded my 8 ft. trailer with about 1,600 lbs of Mesquite (way over loaded) and them helped him load his 20ft. 3-axel trailer with what we estimated to be about 4-5 tons. He is in his mid 40's and I am 68 so that was quite a workout for me but I survived it. He has got 3 helpers starting yesterday and plans on getting all the trees and the rootballs. The older the tree, the nicer the wood.

Re: Free or inexpensive dry wood

#7

Dick Hines

Re: Free or inexpensive dry wood

Dick Hines

>He usesd to work for a tree trimmer. I bet if your talk real nice to Richard he will let you into his log pile.

Re: Free or inexpensive dry wood

#8

Re: Free or inexpensive dry wood

Mark Williamson

>Unfortunatly, Richard finally built his house (Good thing) and installed a hugh wood burning furnace to heat his house with! He is burning most of what he brings home and the majority of what he cuts down is run through the chipper on site. (It's heart breaking really! LOL) He did tell me that he would let me go through and get some stuff but it seems the only thing he is bringing home as of late is pine and oak. I showed him some of my turnings and he is thinking about getting a lathe now. So I think I may have "Shot myself in the foot" so to speak. :) I did try to call him the other day to see if he had anything good, hasn't called me back yet.

Carole - Richmond meeting is this Thursday! I can't wait!!!

I will ahve to check some of the saw mills around here but I have found that most of what is milled around here is pine. Lots of pine!

And then more pine! LOL

Re: Free or inexpensive dry wood

#9

Re: Free or inexpensive dry wood

Dick Coers------WebKitFormBoundaryqFOmq51H3saAc+aC

>Nice gloat. That's not free wood, that's a gift!!!!!! Congrats and if you could list the place to purchase some of those burls, heck I would give them twice what you paid!!

Re: Free or inexpensive dry wood

#10

Re: Free or inexpensive dry wood

Barry Irby

>Mark, the meeting is Thursday (tomorrow, the 17Th) night at the Wood Craft store in Willow Lawn in Richmond. Come join us. I never can remember the correct time but the crowd starts to assemble at about 6 or 6:30. Anybody else interested is invited also. Its a good group.

Re: Free or inexpensive dry wood

#11

Re: Jerry, where are you from?

Allen Neighbors

>Our Mesquite doesn't get that large up here in NW Texas, except few and far between, and then they all have pith checks. You must not have much wind where you live. :) And in all the Mesquites I've cut up for firewood, I've never seen a burl. (That really doesn't mean much, though, I probably didn't know what to look for.) You Lucky Dawg!! Have fun!

Re: Free or inexpensive dry wood

#12

Re: Free or inexpensive dry wood

Mark Williamson

>I keep forgetting the time of it (I think I have it now! he he) but I have been waiting for tomorrow for what seems like forever! I can't wait to start meeting other turner's! I don't really know any. I have met Dick Hines before, did some tree work for him a couple of years ago. I did get a chance to see some of his pieces! I have talked to Carole Valentine a few times and was able to check her website out! Beautiful pieces as well! I just wish it was more than once a month?! Is there such a thing as smaller local groups that meet more often? If so, how do I find out if there are any in my area? Anyway, hope to meet lots O' cool peeps! I'll be the skinny guy in the green superman hat!

OT - How in the H*** do I get this stupid password off!!!!! I have gone into the profile and erased it and clicked don't save password and saved the profile two or three times now and it seems to keep going back to wanting it each time I post! ERRR!!! What the heck am I doing wrong? LOL

Re: Free or inexpensive dry wood

#13

Re: Jerry, where are you from?

Jerry Whitaker

>Allen, I live in the Rio Grande Valley in Edinburg, TX, near McAllen. These trees are real old...some over 100 years old. The older they are, the prettier the wood. Just the shear weight of some of them with their downward pressure on the trunks make the trunks have curly grain. There are lateral limbs on some of these trees that are in excess of 20 inches in diameter. There is one that fell down in a storm but survived. There is a 15 foot section lying horizontal on the ground that is every bit of 24 inches in diameter and real straight. In fact, there are a lot of trunks and limbs in this bunch of trees that have 6,7 and 8 foot long straight sections good for milling into flat lumber. This is real rare for the majority of Mesquites. I think you might see some of this wood at SWAT in Waco next October if you go. We caught a guy stealing some of the wood last Sunday and made him unload his trailer. Had to talk to the police and the sheriff so they could make extra trips in the area to kee the thieves away. Mesquite is getting scarce due to the fact that everyone else wants it for Bar-B-Que. If you see a piece you better have the means to grab it right then because by the time you go home to get your chainsaw and get back it will be gone. This happened to me one time. When I went back a guy was there with a long chain. He wrapped it around the large portion of the tree and hooked the other end to the hitch on his truck and took off home. I have done this a couple of times since when I was in my Ford Explorer without a chainsaw. Works great but people sure look at you funny and I am not sure what the cops would say or do if they were to see this weird event.

Re: Free or inexpensive dry wood

#14

It would thrill me to just see...

Allen Neighbors

>one of these trees you described!! I love Mesquite wood, and cut a lot of it here, but none that large. The ranchers in this area want it gone, because it robs the soil of moisture that would otherwise nourish a pasture. The majority of the Mesquite in this area is near 6-8 inches diameter. A 10-12 inch diameter tree will have a short, about 3', trunk, and be pith checked... mostly because of high wind in storms.

Re: Free or inexpensive dry wood

#15

Save the password ;)

Ed in Leaside (Toronto, Ontario)

>

Re: Free or inexpensive dry wood

#16

Re: Free or inexpensive dry wood

Carole Valentine

>That's about all they mill in Eastern VA. The local mill here (closed now) used to run hardwoods about every three months but it was always Oak. Wait 'til the next hurricane hits - you be able to get more wood than you know what to do with!

Re: Free or inexpensive dry wood

#17

password

JohnKJordan in East TN

>>...it seems to keep going back to wanting it each time I post!

I don't know exactly how this works, but Woodcentral never asks me for a password.

Does your cookies directory contain a woodcentral cookie? If so, you might delete it then reopen WC and reset your password and let it make a new cookie. If you do not have a woodcentral cookie and have cookies blocked in your browser or some guardian software, unblock.

Re: Free or inexpensive dry wood

#18

Wow

Barbara Gill, Remlik VA

>As much as I love Mesquite it would almost be worth a trip.

Re: Free or inexpensive dry wood

#19

Road trip! :)

Carole Valentine

>I love it too, but I have never seen mesquite burl. Bet it's fantastic!

Re: Free or inexpensive dry wood

#20

Re: Free or inexpensive dry wood

Mark Williamson

>I have always loved hurricane season, not for the wood possabilities but I just love a good storm! It's humbling! Of course, now that I am wanting wood, we have no storms come through?! This year was a bust! I finally caught up with my friend that Dick H. was talking about that does tree work! He has given me permission to scavenge his log yard any time I want as long as I don't take the oak! (Oh darn, no oak! I think I'll have to stop turning now! LOL) He surrently had a pretty good size maple crotch and a pretty good size cherry crotch as well as some descent logs of both just laying there ready for me to take! Yippie! He has some hickory too but I didn't know if that was good for turning. I seem to remember hickory being brittle and bad with checking? Is that incorrect? I may grab a chunk just for the heck of it?! The two crotches however are going to fill up my little ghetto trailer! LOL May not even be able to carry both in one trip?! HE said that he is going to staret calling me when he gets a good tree to see if I want it. If I do then he will just drop the whole log off at my house!

I heard that after Isabelle, some of the local state parks were letting people come in and take the old trees that were already down on the ground as long as you didn't disturb anything else. Not sure how easy that would be to do but I heard that people were bringing out hugh logs and having them milled. Now that I have the ability to do that and a place to store all of it, I hope somethign like that comes along again!!! (Of course with no damage to anyones property! :) )

Re: Free or inexpensive dry wood

#21

Re: Road trip! :) *LINK*

Mark Williamson

>I ahve never turned mesquite and since you said you had never seen a burl, I figured since I hadn't either I would do a search....

I again didn't turn this but I thought it gave a good view of the wood....

Also, this is a link to a website that sells knife blanks but again gives references to many different woods that I had not seen...


img

www.alphaknifesupply.com

Re: Free or inexpensive dry wood

#22

We need pictures!

Ron in Drums PA

>

Re: Free or inexpensive dry wood

#23

Come on down...

Allen Neighbors

>and bring your chainsaw and anchorseal... we'll go out and get you some! :) I'm going out this weekend with a friend that just bought a large acreage of Mesquite covered pastureland. He's going to show me the way in, so I can cut anytime I need it. (could that be a drive-by gloat?) :))

Re: Free or inexpensive dry wood

#24

Caravan of Virginians

Mark Williamson

>You better be carefull what you say, your about to have a string of trucks with Virginia tags a mile long pulling into your front yard! LOL Your lucky Texas is so far away! If you were in North Carolina or Maryland, we would all be there right all ready asking for hot soup, coffee and all the mesquite we could get onto the trailers! ;)

Mark

Re: Free or inexpensive dry wood

#25

Re: Caravan of Virginians LOL

Allen Neighbors

>I invited Barbara Gil, intending the invitation to extend to Carole Valentine, too... but I didn't invite the rest of you ne'er-do-wells.

(big grin, with tongue in cheek, of course)