Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Hanging a bowl

Posts

Hanging a bowl

#1

Hanging a bowl

Jim Rutten

>Hello all,

I made a small bowl out of Padauk for my mother for Christmas. She loves it but she lives in an assisted living place and space is at a premium. She asked if I knew anyway to hang it (like on a wall). Probably wouldn't be too hard if I had left a foot on it, but I thought it looked best with just a flat bottom. Anyone have any ideas? I'll be checking back throughout the the day and thanks for your help.

Re: Hanging a bowl

#2

Re: Hanging a bowl

Bart Rhoads

>Depending one the shape of the bowl but you might be able to adapt a plate hanger to the bowl

Re: Hanging a bowl

#3

Re: Hanging a bowl

john lucas

>Jim I made a spring loaded round dovetail wall hanger to hang a platter once. If you put a dovetail base on the bowl this would probably work. I still have the prototype. I'll take a photo tonight if your interested.

Re: Hanging a bowl

#4

Re: Hanging a bowl

Stuart Johnson

>Make a small, simple shelf for the bowl to set on.

Re: Hanging a bowl

#5

Re: Hanging a bowl

Dennis Yoder

>If the bowl is light enough, the 3-M product "Command" could be used to attach a hook or eye or two and then hang the bowl from the wall. The "command" could be pulled off with out damage to the bowl when a different display method is desired. "Command" can be found in craft stores and the borgs. Dennis Y

Re: Hanging a bowl

#6

Re: Hanging a bowl

Jim Rutten

>If it wouldn't be to much trouble I would love to see what you have done.

Re: Hanging a bowl

#7

Re: Hanging a bowl

Dinyar Chavda

>Jim:

If you're willing to hang it from a wall, would it be possible to just screw in a (small as possible) clear plastic shelf into the wall, and place the bowl on it? I've done that for some small wood pieces I have.

Re: Hanging a bowl

#8

Peter Charles Fagg (UK)

Re: Hanging a bowl

Peter Charles Fagg (UK)

>My favourite platters are usually over 24 inches in diameter and they are designed as wall hangings rather than utilitarian.

I always leave the dovetail on the base and usually hammer a small pin in to the corner of the dovetail from which to thread either thin twine, brass wire or fishing line. (dependent on the weight)

It has worked well for years and is certainly the method I would advocate.

Regards, Peter.

Re: Hanging a bowl

#9

Re: Hanging a bowl *LINK*

Rick Allen

>I have used these and I find them to work well.

You could make something like this out of wood.


img

Table or Wall mount Clear Acrylic Bowl Holder