Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Green Sandlewood- Those Who Know

Posts

Green Sandlewood- Those Who Know

#1

Green Sandlewood- Those Who Know

Barbara Gill, Remlik VA

>When I was down in Greensboro for the Symposium, I bought a 3"x6" block of very green Sandlewood. I have cut it into two 3x3's and rounded them, leaving the wax on the ends. I have no experience with Sandlewood. I would like to turn some boxes out of it.

For those who know about this wood, what would you suggest? Should I just leave the rounds up on the shelf until they get good and dry, soak them in denatured alcohol or what?

Re: Green Sandlewood- Those Who Know

#2

Re: Green Sandlewood- Those Who Know

JohnKJordan in East TN

>A 3" round will take a while to air dry. Some box makers (e.g., Raffan), recommend turning tenons on each end of green box blanks, parting the blank in two, partially hollowing both the top and the bottom, then letting them air dry. Mark the figure alignment and keep the halves together, perhaps with some tape.

I have a number of these "rough-turned" boxes drying. Those I've used have worked out well.

It does help to plan the design before roughing so the walls can be as thin as possible for better drying but not too thin!

JKJ

Re: Green Sandlewood- Those Who Know

#3

Thanks John

Barbara Gill, Remlik VA

>