Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Mixed Media piece

Posts

Mixed Media piece

#1

Mixed Media piece

Ed Karch

>Here is one I did last October in Texas

Striped maple 9 1/2 " diameter partially dyed very light blue with one coat of Mahoney oil and fused sheet, frit, stringer, and powdered glass. First in the weather series, title is rain using Native American symbols tells the story of the cycle of the sun heating the waters and forming clouds, the story then moves to the ripple of rain seen in the wood finally falling on the soil to nourish the corn. I found designing mixed media pieces to be very challenging. One can just chose one as a frame to present the other without any real relationship between the two media. One method for integrating mixed media is to continue patterns or story lines from one into the other thus binding the two media into one piece. Comments invited


img

Re: Mixed Media piece

#2

Very nice piece, Ed...

GaryG in MD

>I've held this piece, and it's even more impressive than the photo. It's nice work, and the inspiration, imagination, and thoughtfulness of its creation make it special. ...Gary

Re: Mixed Media piece

#3

Steven Antonucci

It's hard to be able to comment (tiny picture)

steve antonucci

>I would love to see where the glass and wood meet better. I think that the overall success of these efforts comes into where the two media touch each other. It's like joinery in furniture- how the pieces connect make or break the piece.

Steven

Re: Mixed Media piece

#4

Re: Mixed Media piece

Carole Valentine

>Ed do you have a larger picture? I just can't see this one well enough to tell what I am looking at!

Re: Mixed Media piece

#5

Re: Mixed Media piece

Ed Karch

>Carol here is a bigger photo.


img

Re: Mixed Media piece

#6

Re: Mixed Media piece

Ed Karch

>Here is a different angle showing the side and the joinery. The turning was flattened for the front glass on a router table and the glass glued in place. The side piece is slid into a slot cut in the tutning.


img