Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Weeping Willow?

Posts

Weeping Willow?

#1

Weeping Willow?

mwwoodworks

>Hello all,

Was cutting down some trees around the house yesterday and discovered some non rotted wood when I got to the dead weeping willow. Curious of how it turns? Has anyone ever turned any and if so, is it worth it or should I just throw it on the firewood pile. I would hate to burn it if it is nice to turn. Thanks for any feedback!

Re: Weeping Willow?

#2

Re: Weeping Willow?

Bruce Lane

>My rule of thumb is that nothing goes to the burn pile without have been on the turn pile.

Bruce

Re: Weeping Willow?

#3

Re: Weeping Willow?

gtwilkins

>I cut and milled a weeping willow 10 plus years years ago, many of the planks warped to badly to be of use for flat work so I started turning them.

It cuts well and it is incredibly light for the size of the object, with golden amber to tan to redish hues that darken and become richer with age. Plus as you turn you will find little feather patterns in the wood. I have mainly done platters as my stock was 2 1/2" to start but a 16" platter couldn't have weighed more than an ounce our two. Wish I had more!

Trevor

Re: Weeping Willow?

#4

Re: Weeping Willow?

tek-Brunswick, Ohio

>You might as well try turning it. It doesn't offer much in value as burning wood. I have one in the front yard that is going to have to come down one day. It's better than 4' in diameter. The house faces South and it's the only shade I have in the front. That is the main reason I haven't had it taken down yet. The other reasons are there is no place to drop it and my 18" bar is no match for that tree. They are messy trees. I would not plant one unless it was in a woods not a lawn type area. Mine came with the house and property.

Re: Weeping Willow?

#5

Re: Weeping Willow?

Cyril Griesbach

>I tried some willow once a few years back and it was so stringy it reminded me of spagetti squash. The problems could have been due to my skill level at the time but back then I wasn't having trouble with other woods. I don't recall if it was weeping or not. I guess I'd give it a try again if some appeared at my door.

Re: Weeping Willow?

#6

Re: Weeping Willow?

mwwoodworks

>Thanks for everyones insight on the willow! I guess I'll go ahead and give it a try! It was a relitively small tree, so I will be limited as to what I can turn. However, as said, it would be a shame to burn it if it could be turned! LOL

Re: Weeping Willow?

#7

Re: Weeping Willow?

JohnKJordan in East TN

>>...I will be limited as to what I can turn

If you can cut have small diameter pieces about a foot long or so, you could make some magic wands!

Hey, do you want to sell or trade a bit of that? I've had requests for wands made from willow and I have not yet found any.

JKJ


img

Re: Weeping Willow?

#8

Re: Weeping Willow?

mwwoodworks

>Magick wands?!? Interesting! Who would have known that people would want little magick wands?! Fun! I turn miniatures actually, so I would really get a lot from just a small piece. I would love to humor the idea of a trade! Where do you live? I am in West Point, Virginia. (Just east of Richmond) I would be willing to take some pictures of the chunks that I have and email them to you. Email me and let me know what you would like to do? Perhaps, if you see the pictures and decide that you would in fact like some of it, I could send it to you and once you recieve it you could just send me something in return that you think is comparable? I am open to suggestions!

MWWoodWorks@hotmail.com

Re: Weeping Willow?

#9

Re: Weeping Willow?

Barry Irby

>A traditional use of willow was to make prosthesis. Wooden legs and arms. It was very light and strong for its weight, so good for this. I'm sure the high tech plastics have surplanted it for the use.

Not sure weeping willow is Identical to willow as far as the wood goes.

Re: Weeping Willow?

#10

Re: Weeping Willow?

JohnKJordan in East TN

>>Who would have known that people would want little magick wands?

You'd be surprised. I set up a small lathe on the sidewalk in front of a bookstore when the last Harry Potter book was released and sold $1750 worth of wands without even trying. I ran out of those I brought, sold every one I could make, and even had people come to the house later for more. Wands from $15-$40 got snapped up quickly. Many adults were buying for themselves.

I live in East Tenn somewhat north of Knoxville. Some of us trade wood by way of the US postal service's Flat Rate boxes - $8.95 for all you can stuff in one of their free boxes, regardless of what it weighs. I sent out a few of these recently. Box size is either 11"x8.5"x5.5" or 13.625" x 11.875" x 3.375".

I have plenty of local woods like walnut, cherry, maple, cedar, sycamore, black locust, oak, and some others like osage orange, honey locust, and mulberry. I mostly do small spindle turnings so I cut my wood accordingly to dry quicker, but if you like to turn bowls instead I could whack you off a bowl blank of clear walnut or something that will fit into a box.

I'll send an email.

BTW, some other nice things to make from small diameter are little weed pots (especially nice around mother's day if you have any little shop helpers) and finger tops. Some conventional wisdom holds that lightweight wood is no good for spinning tops, but my experience is different.

JKJ



Re: Weeping Willow?

#11

Re: Weeping Willow?

MWWoodWorks

>Thank you everyone for your insight! After looking at the chunks again closer, I see that it is in fact very light wieght for its size! Interesting! I will have to do a bit more research on the species thing, good point though, it may not be in the same family. I think it is going to be quite nice looking once turned?! We shall see! Only a little bit of the center is punky with some hollowed out sections. the rest of the wood seems to be pretty stable. It should be fairly well seasoned since it has been dead for over a year! Thanks again!

Re: Weeping Willow?

#12

Re: Weeping Willow?

JohnKJordan in East TN

>>It should be fairly well seasoned since it

>has been dead for over a year!

Don't be surprised if it is nowhere near dry - wood in log form can take a very long time (or forever) to reach air-dried equlibrium.

JKJ

Re: Weeping Willow?

#13

Re: Weeping Willow?

MWWoodWorks

>JKJ,

Very good point, however, this tree was more like a shrub really. LOL

Coming in at a whopping 6" in diameter! he he It probably is still wet though. I don't have a moisture meter though so I can't be sure. It is pretty light weight? I will split some down the center and send it to you!