Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Puriri box...

Posts

Puriri box...

#1

Mike Stafford

Puriri box...

Mike Stafford

>A friend on another forum played Secret Santa and sent me a box of blanks suitable for turning boxes of various woods from New Zealand. He included blanks of puriri, rimu, black maire, ancient kauri and kauri woods. Some of the blanks he had roughed himself and they had been allowed to dry in his shop. This box was turned from a blank that he had roughed out using a Forstner bit so all I had to do was shape the exterior and finish hollowing the inside. I rough turn boxes and partially hollow with a gouge and have never considered drilling out the interior when roughing.

This box is 2" tall and 2 3/4" in diameter. Puriri is a fine grained wood, easy to turn and has a bit of a spicy smell. It was a pleasure to turn. This box is very light and has a most wonderful lid fit. My wife took possession almost immediately upon bringing it into the house.

Comments appreciated...


img

Re: Puriri box...

#2

Re: Puriri box...

john lucas

>Mike I had the same surpise from New Zealand. It came in the mail last week. What an incredible surprise. I haven't had time to turn mine yet. It's sitting on the workbench as inspiration.

Re: Puriri box...

#3

Dick Hines

Re: Puriri box...

Dick Hines

>Mike, your boxs are the best I have ever seen. One day I hope to be able to turn boxs 1/2 as good.

Re: Puriri box...

#4

Steven Antonucci

A question for you

steve antonucci

>This seems to be your signature form in boxes. Do you use other forms or experiment with other box shapes?

Steven

Re: Puriri box...

#5

Mike Stafford

Re: Puriri box...

Mike Stafford

>Dick, thank you for the very nice compliment. I do appreciate it.

Re: Puriri box...

#6

Mike Stafford

Re: A question for you

Mike Stafford

>Steve, I do experiment with other forms and I have turned many other forms. I have been working on this shape and many variations of it trying to get it just right. I am still not 100% satisfied with the thickness and shape of the lid. I am stuck on this shape right now as it is a pleasing form to me and it seems to others that uses a minimal piece of wood in length allowing me to get more boxes out of a stick. This box can be turned easily from a piece of wood 3" long. Women, who seem to buy more boxes, like this form. It has an easy to grasp shape, no sharp edges and is of a size that fits a woman's hand.

I apologize for posting the same general box form over and over again but sometimes I am posting it to show off the wood as in the case of this box.

Re: Puriri box...

#7

Keep 'em coming, Mike...

GaryG in MD

>

Re: Puriri box...

#8

Steven Antonucci

No apology necessary, Mike!

steve antonucci

>I didn't mean to insinuate that there was anything wrong with the boxes you make. I was asking more about if you are trying to make the same shape with subtle nuances or you had kind of fallen into a rut. We've all turned "in a rut" before, and sometimes, I find myself on autopilot making the same shapes. I usually take a break if I'm not trying to make those shapes...

I like this box, but I would have like to seen the foot go to full round with maybe a small dimple to keep it steady when placed on a table. I wouldn't change anything else.

Steven

Re: Puriri box...

#9

Re: A question for you

Barry Irby

>I like this box. And I like the fact that you make it over and over. Gives you and us by extension a chance to check out the subtleties and how it is affected by different pieces of wood. And I agree with Dick, If I get half this good I will be pretty happy.

The shape looks very "practical" to me. Good design, nice eye appeal, excellent use of the material, and good ergonomics. Both the bottom and top are easy to grasp and it gives good purchase to pull it apart. Some I have made have been too rounded and tapered and were so slick it was hard to open them. Great design at many levels.

Keep on posting, and thanks.

Re: Puriri box...

#10

Mike Stafford

Re: No apology necessary, Mike!

Mike Stafford

>Interesting comment about the foot. I am sure it is hard to tell but the foot is about 3/4" in diameter. Much smaller and I have had problems with the box becoming tipsy and rolling off the shelf. It also give me enough room to include my name, wood species and year.

No offense taken; I just figured that everyone had seen this form enough. Like I said, the species of wood was of most interest to me in this box.

Re: Puriri box...

#11

Little boxes

Ron in Drums PA

>Mike, this is one of my favorite shapes to turn. It's a hollow form with a lid.

It's the nuances that make or break a successful piece. Everyone I turn I always say to myself, "The next time I'm going to turn _____ a little different."

Pictures don't do these little guys justice, you need to hold them in your hands to really enjoy them.

Re: Puriri box...

#12

Mike Stafford

Re: Little boxes

Mike Stafford

>Ron, you were one of the people back when I was learning to turn boxes whose work was inspirational to me. I am always pleased to see your work and particularly when you post boxes. They are always crisp, clean, stylish and downright good looking. My only complaint is that you don't post enough boxes. Your comments are always appreciated. Have a great day!

Re: Puriri box...

#13

Wow

Ron in Drums PA

>What great compliment, Thanks!