Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Thickness gauge

Posts

Thickness gauge

#1

Thickness gauge

Steven Kubien

>Afternoon everyone,

A few months ago, someone posted pictures and how-to's of a thickness gauge they made for bowls, vases etc. It was made mostly of heavy steel wire or thin rods. Ring any bells? I thought I had copied the message but now I cannot find it.

Help?

Thanks,

Steve Kubien

Re: Thickness gauge

#2

Steven Antonucci

It was only a few days ago

steve antonucci

>Scroll down a bit.

Basically, cut a coathanger and file the ends round. Bend to a known gap and "feel the inside". The difference in the gap on the outside and the preset gap is your wall thickness.

Steve

Re: Thickness gauge

#3

Dick Hines

Re: It was only a few days ago

Dick Hines

>check wed Jan 9. There is some pictures in that thread

Re: Thickness gauge

#5

Re: Thickness gauge

Steven Kubien

>Not sure how I missed that on January 9th. I'll blame it on the solar flares getting in my eyes. Yup, that's it and I'm sticking to it.

John, that was exactly the post I was looking for. Thanks. The link has now been 'favourited'

Steve Kubien

Re: Thickness gauge

#6

Re: Thickness gauge------WebKitFormBoundaryA6A8dNB

Mike from St. Clair Shores------WebKitFormBoundary

>I made two of the solid metal gauges, one large and one small. They just weren't sturdy enough for me. So a friend of mine came up with this one made from plywood. It works great and is very accurate.

Mike


img