Re: Respirators
Fog Tanner
>I have both the Powervisor and 3M Airstream. The Powervisor is the same as the Trend unit. I have take a direct hit (fairly hard one) on the face shield of the Powervisor with no brakage - of either the face shield or my nose. So I will say it is good from that stand point.
My preference is the Airstream. The visor is better than the Powervisor and I can flip it up when needed. The helmet protects your skull in the case of the wood missing your visor a little high. Raffan received 13 stitchs in is head from a piece that came loose in a demo, one of the few times he does not wear his Airstream.
The filtration is much better than the Powervisor, it will go to the submicron level. I am allergic to Cedar and was recently turning some Aromatic Cedar. I could tell that the wood was red, but could not smell it until I opened the visor. With my sinus and allergy problems this unit is a real must.
I wear glasses and they do not fog up like the half face units I have tried. If you have facial hair, there are no sealing problems either. I use a half face respirator when painting, and when I hada beard I always had problems with sealing.
It is better balanced than the Powervisor or Trend. The fan unit is in the back and the battery hangs on a belt. The front to back balance is very good and after a short period of time you don't even notice it. Then after using it for a few times, it is more comfortable to wear than a regualr face shield. In the summer it is espeically more comfortable as it blows air across your face, and in Texas any breeze is welcome in July-September..actaully anytime, but those are the months that concrete starts to melt here.
The battery on mine will last 10-12 hours before recharning. I bought the "Smartcharger" which will only charge the battery to what it needs. If the battery has only been used for 30 minutes, it will charge only enough to bring it back up and then go to trickel mode. You can leave it on trickle for a month, so it is always ready to go when you need it.
I think enough of it, that when I took a class with Raffan this past summer in Provo I drove from Texas (1600 miles one way) just so I could take my Airstream. We had a solid 5 days of making dust and I did not have any sinus problems from it. Normally I would have made it one day and sinus headaches the rest of the time from the dust. Anytime I am turning I wear the Airstream, regardless of wood condition. I have a cyclone dust collector, which is also running when I turn, and can see the stream of dust comming off the tool. So you are generating dust all the time, not just when you are sanding.