Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Siberian Elm HF (thanks to Andy DiPietro) PICS

Posts

Siberian Elm HF (thanks to Andy DiPietro) PICS

#1

Siberian Elm HF (thanks to Andy DiPietro) PICS

Mike Rubes, Apex, NC

>Hi all,

It's been a while for a pic from me, but I really have been busy in the shop. I got this wonderful piece of wood from Andy back at Bill Grumbine's picnic in July. I roughed the piece in Sept and finally got time to finish it. The siberian elm was wonderful to turn and had a very pleasant aroma.

This piece is about 5 inches high about 4 inches across. It's a little thick (1/4 inch or so) at the bottom, but fairly thin on the sides and top. The finish is Tried and True Varnish followed by a Beall buffing, skipping the white diamond step.

I like the little burl clusters around the top. I've not done many pieces where the collar is part of the wood, but I like it and will do more.

Comments and critiques are welcomed and encouraged.

Thanks for looking,

Mike










Open door shop time in January in Apex, NC!!!

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#2

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Cyril Griesbach

>It's a real nice one, Mike. I personally don't care for the hard line transition to the collar but that's just me. Great looking piece of wood and I like the dark eyes also.

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#3

Dick Hines

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Dick Hines

>Very nice. I like the burl at the top.

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#4

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Allen Neighbors

>I like it, and think you did the wood justice... the curve from collar to bottom is a lovely curve. Well done.

If the sharp transition to the collar were just a tiny bit thinner, the curve would be continuous from the opening, down "through" the transition, to join the curve below the transition, and continue on to the bottom.

Yep, well done. Anyone would like to have this form in their collection. :)

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#5

Steven Antonucci

Know that tree well...

steve antonucci

>Andy and I spent a bunch of time in the field that it was dumped, and we each took a LOT of that wood. I like the form, but I'm not a fan of flat feet. Even though the foot is tiny, I would have liked a small curvature where it meets the table.

I don't mind the collar being a bit proud. I think that it adds interest to the form, and with the burl cluster being where it is, looks ok.

Steven

Still sitting on a few pieces of that tree...

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#6

Andy DiPietro

Very Nice!!, I was wondering .....

Andy DiPietro

>if you ever turned the wood I gave you. Really nice job on the hollow form. I would curve the bottom in a little more but that is minor for a piece that size. I like the collar too. I hope you have more Siberiam elm to make a couple more pieces. Siberian elm is an excellent turning wood.

Best Regards

Andy DiPietro

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#7

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Mike Rubes, Apex, NC

>Hi all,

Thanks for the responses, I appreciate all the critiques and suggestions. Andy, yes, I have enough of that wood left for 3 more pieces, all about this size. I've got one roughed and the other half of that log chunk still sitting in the closet until I decide what to do with it.

It was really great stuff to turn!

Mike

What a great day in Apex, NC!!!!

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#8

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Jorge Castaneda~Downeast Maine

>Hi Mike,

Nice piece!

My suggestion would be a smaller collar.

How is that knee coming?

Jorge

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#9

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Mike Rubes, Apex, NC

>Hi Jorge,

Thanks for the note. The consensus seems to be that the collar is too big and I agree. Also, I like the idea of curving the bottom under more. I tried that on a piece of oak I just finished and I like that better.

My knee currently feels ok when just sitting, but when walking, I can feel things sliding around. It's an odd feeling!

My ACL reconstruction surgery is scheduled for Wed, the 23rd of Jan. I am actually really looking forward to it so I can get it done and then start the rehab.

I do my "prehab" three times a day and can still hit the stationary bike pretty hard, so at least I am getting some cardio.

Thanks for asking!

Mike

The warm weather makes me want to play soccer all the more in Apex, NC!

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

#10

Re: Siberian Elm HF (thanks to Andy DiPietro) PICS

Jorge Castaneda~Downeast Maine

>Hi Mike,

Good to hear you are in good spirits.

That cardio activity is your best friend to recovery.

I'll be rooting for you the23rd...

Jorge