Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Teaching..What to charge?

Posts

Teaching..What to charge?

#1

Teaching..What to charge?

Dave Winters

>Have had a few requests for lessons, in my shop, and wondering what those of you who teach charge. I'm thinking $50.00 for a 1 hour session, not including materials...

Thanks in advance

Re: Teaching..What to charge?

#2

Re: Teaching..What to charge?

Dick Coers

>It really depends on the students, but that may be a little steep. Some of the published/teaching professionals charge $400 a day, some more. If you are teaching an advanced session, the higher cost may be okay. If you are teaching beginners, the information will barely be starting to sink in at the end of an hour. It's a job getting 3 or 4 turners to get a bowl after a 3 hour class. I end up wasting a lot of the interior of the bowls for them, so they can take something home. If I had my way, they would throw away the first two and maybe keep the third bowl. That would take most of the day, and I would personally have trouble asking the $400. I teach at the local Woodcraft and they wouldn't pay that much anyway!!!!

Re: Teaching..What to charge?

#3

JL

Re: Teaching..What to charge?

JL

>Nick Cook charges $250/day or $150/half day for one on one instruction.

Highland Hardware charges $95/day for a group class.

John C Campbell Folk School charges $270/weekend (Friday night through Sunday morning).

$50/hour seems a bit high.

My $0.02.

Re: Teaching..What to charge?

#4

Re: Teaching..What to charge?

joaz

>I charge $30 per hr. 4 hr minimum.

Two 8 hr sessions are about all most people need.One on one.

Of course advanced students might need less, beginners more.

Re: Teaching..What to charge?

#5

Re: Teaching..What to charge?

Ron in Drums PA

>Perfect timing

Since I placed my old 1236 up for sale, I have received a few requests to give lessons. I was also thinking of $50 per hour with a 4 hour minimum. I figure I'm going to knock myself out of the ballpark with a price like that, but my time is worth at least that to me.

Re: Teaching..What to charge?

#6

Re: Teaching..What to charge?

eaglesc

>I don't teach, but for those who say that $50.00 is steep I am wondering if they are taking into consideration the cost of utilities, the fact that if you are teaching someone how to do something you are not making productive use of the time you could be making something in your shop that you could sell.(if you sell your work).

If this is an ongoing thing check your insurance, I am sure your liability coverage is higher if you are using your shop space for financial gain while teaching.

I think a $100.00/hour would be a more realistic figure.

Re: Teaching..What to charge?

#7

Re: Teaching..What to charge?

Mike Cunningham (Cape May NJ)

>$30 per hour and I don't think you should even consider a one hour lesson....4 hour minimum.

Re: Teaching..What to charge?

#8

Steven Antonucci

Ask for what you are worth

steve antonucci

>I had an opportunity in 1999 to do some consulting on the side of my full time job. Wasn't really looking to, but it fell in my lap. I priced myself at a rate that I thought the guy would choke on, and he asked me to start on the spot.

Point is, you know what your time is worth to you. If it isn't worth it to the student, then you'll both be better off somewhere else.

Steve

P.S. What does it cost to make lousy bowls for 6 months? a year?

Re: Teaching..What to charge?

#9

You are probably right

Ron in Drums PA

>$100/hr is more realistic.

Re: Teaching..What to charge?

#10

Re: You are probably right

Wally Dickerman in Arizona

>$100 per hour? It's much less with the other Dave....Ellsworth, that is.

Wally

Re: Teaching..What to charge?

#11

Re: You are probably right

Ron in Drums PA

>Go to a good cabinet shop, or a shop where they make fine custom furniture and ask them to give you some lessons on the products they make.

How much do you think they are charging their customers per hour?

Do you think turning is less worthy than flat work?

Like I said in my original post. "I figure I'm going to knock myself out of the ballpark with a price like that, but my time is worth at least that to me.

My name is not Ron-Mart ;-)

Re: Teaching..What to charge?

#12

Re: Ask for what you are worth

E.T.

>When asked for hands on lessons, I quoted $150 per day (6 hours). Never got any takers. Would be woodturners around here are notoriously cheap. Probably expected a lesson for $20, I really don't know what they expect.

Teaching IS A LOT of work. For every hour of lesson you must plan for at least one hour of preparation time, maybe two hours.

For $50/hr you will have to give pretty good lessons.

5 days (9 to 5with Richard Raffan cost $750 in a class of 6 or 7 at a wood & tool store with Oneway lathes and all the shop bells and whistles. ET

Re: Teaching..What to charge?

#13

Re: Teaching..What to charge?

john lucas

>Around here you can't get $50 an hour. I usually charge $100 a day but I try to make it a very stress free day for me. This obviously isn't a money maker so I do it help people out. Even at that price I get very few takers. If I was in a bigger city I think I could easily get twice that or more.

Re: Teaching..What to charge?

#14

How hungry are you

Ron in Drums PA

>$100 per day.... $30 per hour.... Ellsworth charges less.... I wish I could get $50 per hour in my market.

These numbers are nice. If you want to follow this trend, that nice too. I wish you all the success you can handle. But it isn't right for me.

I guess I'm just not that hungry.

(PS - I never proclaimed to be a Ellsworth, if I was, I would increase my prices.)

Re: Teaching..What to charge?

#15

Steven Antonucci

There's the key!

steve antonucci

>Almost everyone points out that the classes are 4,5,6,7 people over a few days. Take 6 people at 750 for 5 days. That's 600/day, for 8 hours it's $75/hr.

If people want one on one instruction, why should it cost less than a class room full of people?

Steve

Re: Teaching..What to charge?

#16

Steven Antonucci

Actually, he's doing a little better.

steve antonucci

>5 people in the class 2 years ago over three days. We each paid $600, give or take. That's $1000/day or $125/hr, just not per student.

If he doesn't get a minimum number of students, no class. One on one should cost more than the standard rate. I wouldn't kill a weekend day for an hour and $50.

Steven

Re: Teaching..What to charge?

#17

Re: There's the key!

john lucas

>Steve your figures are a little off I think. You forget that all of that money doesn't go to the instructor. The school has pay him, his travel, expenses for running the school etc.

Of course the same thing is somewhat true when you teach out of your shop. You have to consider the electricity, wear and tear on the equipment etc.

Re: Teaching..What to charge?

#18

Steven Antonucci

Oversimplified of course...

steve antonucci

>but it doesn't matter what the overhead is to the "spender". They see it the same way, right? It's not about the money the instructor pockets, but what someone is willing to spend.

I agree that if you add the overhead into the equation, it gets real hard to justify $30/hr for one on one instruction. If I sat down and built out a cost model, I'd bet $100/hr @ 5 students is when it becomes viable to do in "your own space". Depreciating the lathes, time spent cutting blanks for the class, insurance, extra time in clean-up...

A big part of the reason that business fail at such an alarming rate within the first year is that people don't realize all of the costs they incur to provide a product or service. Marketing costs eat at margins, hours are worked but not billable, costs are overlooked.

One on one lessons in my shop are available at $1000/hr. That should keep everyone away!

Steve

Re: Teaching..What to charge?

#19

Re: Teaching..What to charge?

Bill Grumbine (Kutztown PA)

>Dave, I've been reading the responses here, and some of what I am going to write has been addressed already. Teaching rates have a number of variables associated with them, just like the price of bowls. Part of the rate is what the market will bear. That market does not have to be local. It is whatever distance people are willing to travel to see you. Part of it is your own reputation as a teacher. Turning ability and teaching ability are not always found equally in the same person either. Of course, there has to be some turning ability present, or people are not going to be drawn to you. But being a great turner does not always mean being a great teacher.

I started out low, thinking that teaching for me was going to be a brief stint when I ran out of people who knew me. That was in 1999 (when I started teaching on my own). Right now I am having trouble keeping up with the list of folks who want to come. I offer one on one, and classes of two or three. One on one is more expensive, but not so expensive as to replace the amount of income that I could make on a multi student class. But then, I don't have to work as hard either. Time is time of course, and is a constant no matter who we are, but it is not the only factor as far as I am concerned.

The rate that I get in my own shop is different than the rate I get at the local Woodcraft, and both are different than the rate I get when I am on the road doing demos and conducting workshops. All are sufficient to keep me happy in my teaching, although the "margin" is not the same for each situation. I think the three main parts of being a successful teacher are 1)actually teaching people something when they are in your presence, 2)being satisfied with the income you derive from teaching, and 3)making sure that there are enough people happy with those rates that the supply of students is ongoing. If you fail to teach, that will get around, and the supply of students will dry up as word gets around. If you charge too much the same thing will happen. If you charge too little, you will end up feeling resentful and taken advantage of, and that is not good either.

A good teacher with a good reputation will command a higher dollar figure than someone who is just starting out. There is nothing wrong with raising your rate as long as you don't price yourself out of the market. I have kept my rates where they are for a pretty long while now, since I think it is close to the top of what people are willing to spend. Once it goes over the top, then you start to lose opportunities, and the whole thing will sort of dry up. But once you demonstrate that you can provide a worthwhile experience, people will not worry about spending money on hotel rooms, plane tickets, etc, to come and see you.

So, what do I charge? Well, that is for an email, if you are interested. ;-) If you want me to go on, send me an email and we can go from there.

Bill

Re: Teaching..What to charge?

#20

Re: I am happy to share what I have.....

Jamie Donaldson

>... learned over the years, so with a prospective turner 1 on 1 for a 9AM~4PM day in my shop I charge $150 including a simple lunch. For me this practice is more about teaching than earning a living, and I usually enjoy the interchange as much as the student.

Re: Teaching..What to charge?

#21

Now that is another story

Ron in Drums PA

>I think I'd rather share some turning experience for an hour or two (no charge) with someone looking to learn something that I can teach.

Allot more rewarding I would think.

Realistically speaking of course.

Re: Teaching..What to charge?

#22

Re: Teaching..What to charge?

Russ Fairfield

>Be realistic. $50 and $100 an hour sounds good, but those prices are unrealistic, unless you are a "superstar" and have some unique talents to offer the student.

The best way to determine your price is to be aware of the competition. What are other woodturners with similar experience, and within driving distance, charging for classes of similar skill levels?? How much is the nearest Woodcraft or Rockler store charging for a similar class? Your price for individual instruction should be at least the same as the group class at the store, and most people will have no problem with paying 50% more for individual instruction of the same material.

You will most likely find that you will charging no more than $150 a day for an individual beginner, up to no more than $250-300 a day for advanced skills. It always sounds good when you ask for more than that, but what good is there in asking a high price if you have no students.

Start out low and raise your price as you get a reputation as an instructor; and don't expect to get rich doing this.

After reading Bill Grumbine's message, I think everything I have said is redundant

Re: Teaching..What to charge?

#23

Re: Teaching..What to charge?

Raymond Overman in SC

>Bill,

I think you touched on some points I've figured out in doing small business consulting over the past six or eight years. I charge $100-$125 an hour depending on what technology I'm working with. If I'm contracting through one of my friend's businesses, he charges $100-$125 for my time and I get $60 per hour. What do I get for my $40-$65? Less hassle in having to interact with the clients accounting department, a lot less of the liability, and the ability to say no the next time the client calls if I don't have the time to deal with them. It's a good relationship for both of us.

The same goes for teaching a turning class. If a woodworking store is handling the accounting, the hassle of cancellations, providing equipment, and taking the liability, then it makes since that your cut will be less.

If anyone wanted to take a class from me, I think a half day class would be reasonable at $250-$300 and a full day at $500-$550 (including at least a bologna sandwich and an Coca Cola). I'm easy, but I'm not cheap. Of course, I don't know if anyone else would think I'm worth what I think I am.

It's a good and interesting discussion as usual.

Re: Teaching..What to charge?

#24

Some have suggested

Mike Cunningham (Cape May NJ)

>that you charge $100 per hour (they cite Ellsworth and Raffan...yeah, think about that), you might as well charge $400 per hour because you're not going to get it. If you truly want to teach and realize that you aren't going to make a living at it (few do) charge a fee that you are happy with and feel that people will be willing to pay. I suggested $30 per hour with a 4 hour minimum, seems reasonable for the instructor and student. Some instructors that I know (named turners) are getting $150 per day, that's about 6 - 7 hours with a simple lunch. Some are getting more, Al Stirt comes to mind. He's getting $350 for a full day one on one and $450 for two on one, that's an 8 hour day........that's not $100 per hour. So unless you can attract tuners willing to pay more to you than they are to guys like Stirt..........

Like most things, let common sense prevail...........

Mike

Re: Teaching..What to charge?

#25

common sense has prevailed

Ron in Drums PA

>I would not teach for less than $50 per hour, I would rather share an hour or two showing my knowledge to someone who wanted to learn something (Thanks Jamie for helping me realize this).

Just because others charge a small fee doesn't mean I have to. What most folks don't understand is "Perceived Value" which is the flip side to "What the Market Will Bear.� If you think it's worth it, than it is.

Personally I would spend $400 for four hours watching Eagle make one of his famous pens. Wouldn't You!

For me, it just doesn't make sense to make less money than I know can if I were doing other things that are more profitable.