Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Designer Firewood

Posts

Designer Firewood

#1

Designer Firewood

Brian Hahn in SW Wisconsin

>Last fall I posted the picture of a sign that admitted that one of my specialties was "Designer Firewood". Just in case you had any doubt...

Yesterday I was turning a twisted multi-center vase. I forgot to move the tool rest when I repositioned to axis 3. The tool rest didn't budge and the lathe didn't stall. The new hole is 3/8" out of position.


img

Re: Designer Firewood

#2

Steven Antonucci

Lost me?

steve antonucci

>I see where the drive center spun, but besides that, not jumping out at me?

Steven

Re: Designer Firewood

#3

Not a recoverable error.

Brian Hahn in SW Wisconsin

>The positions of the centers/axes are crucial for the piece and the wood is too severely damaged to reestablish the center there. The piece is rather out of balance when it is being turned on the three perimeter axes and the centers must be solid.

I could remove the damaged wood, recalculate where the axes should be, etc....

But this was part of a matched set...

The only viable option is to start another one.

Re: Designer Firewood

#4

Re: Designer Firewood

eaglesc

>Since I know absolutely nothing about this subject I am fully qualified to offer a suggestion..

Would it not be possible to drill out the section that is damaged, plug with another piece of dowel of the same wood.

recalulate center because you have the other two pints.

When the piece is finished do same thing to the existing centers so the bottom is symmetrical.

Call it a design opportunity?

Re: Designer Firewood

#5

Re: Designer Firewood

JohnKJordan in East TN

>>The tool rest didn't budge...

What you need is the JKJ Patented Rubber Tool Rest, not to be confused with the earlier line of slick JKJ Patent Leather tool rests. Just think of the time saved, never having to rotate the blank by hand before turning on the lathe. Order today and we will include free of charge the classy (but noisier) JKJ Glass Tool Rest, made from the finest crystal and also guaranteed not to stop a rapidly spinning multi-center piece.

JKJ