Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

CA Glue?

Posts

CA Glue?

#1

CA Glue?

Frank Joseph

>Will the cold (freezing) hurt the clue. I just got a box of 2oz. bottles. It will last me about a year or so. I keep it in my shop thats not heated at night.

Re: CA Glue?

#2

Re: CA Glue?

adrien Coblentz------WebKitFormBoundaryB5riMd+7AYk

>I freeze the unopened bottles. If they're opened, warming up a frozen bottle will create condensation inside the bottle, acting to activate the glue

Re: CA Glue?

#3

Re: CA Glue?

Brian Hahn in SW Wisconsin

>Cold will not hurt the glue. I store un-opened bottles in the freezer.

Re: CA Glue?

#4

Re: CA Glue? + ?

Ruth Niles

>I was told not to keep the cap on once the bottle is opened. It worked great on 2 bottles of "Starbond", one thick and one thin. They never got hard. I just got 2 bottles of "Stick Fast", left the cap off one and it got a hard crust, left the cap on the other and the glue hardened in the neck. Any thoughts? suggestions?

I'll buy "Starbond" from now on, just hate to throw away 2 full bottles.

Re: CA Glue?

#5

Re: CA Glue? + ?

Brian Hahn in SW Wisconsin

>When the glue hardens in the neck or spout, I drill it out with a very fine drill (#60) held in a pin vise. I also put the dirty spouts in a jar of acetone and they are clean by the time I need to replace another spout.

Re: CA Glue?

#6

Re: CA Glue? + ?

JohnKJordan in East TN

>>...not to keep the cap on... Any thoughts? suggestions?

There have been several past threads here discussing this. Each time, people describe widely different methods which all work well for them (or we assume they would not report them).

My own method is to recap the open bottles and store them on a shelf inside the door of a fridge in my shop. I have never had glue harden in the neck or the bottle since I started using this method some years ago. When I used other methods, I had some terrible experiences.

Others have reported different experiences.

JKJ

Re: CA Glue?

#7

Re: CA Glue?

Bill Hale / The Wood Spinner

>I believe there is a major difference in glue quality. I use StarBond and have never had a problem with heat or freezing. I buy the 16 oz and fill the small bottles he sends free. I had some thick that was almost two years old and still good. I will say that it did thicken just a little. I recap the large bottles but leave the small ones uncaped.

Good turning and be safe

Bill in CG, AZ.

Re: CA Glue?

#8

Re: CA Glue?

Bill Crommett

>To avoid hardening in the neck, I always squeeze the bottle a couple of times to clear the neck of liquid glue, then wipe its nose before capping. The argument whether to cap or not will depend on the moisture content of the atmosphere in your shop.

Re: CA Glue?

#9

Re: CA Glue?

eaglesc

>I use a lot of CA and have been for over 2 years without any "hardening" of course I go through it fast.

I don't know if CA can freeze but moisture is it's enemy.

If your shop freezes at nite then warms up it will have a shorter shelf life than glue that is at a constant temperature.

I store all my 16 ounce bottles in the refrigerator even after they are opened, but I cap them.

A tip for those who refill from a large bottle.

Place a small "baggie" over the open neck and then put the cap on.

it makes opening it the second time easier.

Use a new bag each time you cover the large bottle after transfer.

I don't think other than visosity there is any difference in brands hence I don't pay for the"high priced spread"

My supplier ships 16 ounce bottles of thin med or thick for $25.75 to my door.

I try to order more than one bottle at time.

Buying it this way equates to $3.00 and change for a 2 ounce bottle.

Any one paying $10.00 that the woodworking stores charges must want to keep them in business.

Re: CA Glue?

#10

Re: CA Glue? Checking that the spout is clear

adrien

>Whatever else you do, do not "listen" to the spout to determine that the air is being expelled. Those little droplets of residual glue have an uncanny tendency to enter the ear canal. DAMHIKT

Re: CA Glue?

#11

Re: CA Glue? Checking that the spout is clear

Barry Irby

>If you think it "sounds" bad, don't try smelling it.

Re: CA Glue?

#12

where?

JohnKJordan in East TN

>>My supplier ships 16 ounce bottles of thin

>med or thick for $25.75 to my door.

Where do you buy? One of my bad habits is keeping Woodcraft in business but I'm trying to quit.

JKJ

Re: CA Glue?

#13

CA Glue

George Van

>John, before posting this I wanted to clear this through Ellis. I have a friend that has an adhesive company. He lets me do group buys for our AAW group and a couple of others through him, the last price was $20/pt, $12/8 oz, $4/2oz plus UPS shipping. (it cannot be sent USPS because of the liquid). You can contact me for more information if you are interested.

Re: CA Glue?

#14

Re: CA Glue

eaglesc

>" (it cannot be sent USPS because of the liquid). "

When I ship parcels at the poft office I have never been asked if it was a liquid.

I have received CA from many different suppliers and all used USPS.

If there is a law against it would you please point it out?

Shipping by USPS is far more economical than any other meathod for parcels like this.

The service is far superior to OOOPS and the Fed up with us methods

Re: CA Glue?

#15

Re: CA Glue *LINK*

George Van

>Eagle, our post office up here asks if it is liquid or not. They will not ship CA glue. I do not know if it is security. The last time I got finishes from Rockler and Woodcraft they would not send USPS either. ��....but thanks to your question I went to the USPS web site and looked for more information. I finally found a # to call, they were unsure and told me to call my local post office. I will call again tomorrow as the page I found on their site appears to allow adhesive shipments for both air and ground shipments. Perhaps our postmaster considers it explosive which would exclude it from air shipment. Thanks for the question as our post office is 10 miles and the UPS office is 22 miles. I hope I can change his mind!


USPS Shipping Restrictions

Re: CA Glue?

#16

Re: CA Glue

eaglesc

>As I read the chart you linked to there is no section for adhesives using domestic shipping.

As far as I can see it is allowable to ship by air and surface with USPS.