Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Mean piece of honey locust

Posts

Mean piece of honey locust

#1

Mean piece of honey locust

Dawn Adams

>In between the football games, I will quickly implore for some help. I have a dried rough out bowl of honey locust and when I try to finish the inside with my Ellsworth bowl gouge, I keep getting catches. I change bowls to a rough out cherry and don't have the problem. Is this just a mean piece of honey locust trying to play tricks on me and make me flinch each time my gouge touches the wood?

Help!

Thanks in advance

Re: Mean piece of honey locust

#2

Re: Mean piece of honey locust

don central illinois

>Don't know how much difference between honey locust and black locust, but I haven't have much problems with black locust. Except for operator error, which I have a lot of. Good luck, maybe some other more experienced turners can help.

Re: Mean piece of honey locust

#3

Re: Mean piece of honey locust

Bill Grumbine (Kutztown PA)

>Dawn, try rolling your gouge over just a teeny bit further for the locust and see if that smooths things out for you. Honey locust generally isn't quite as hard as black locust, but it is a lot harder than cherry!

Bill

Re: Mean piece of honey locust

#4

What is the size of bowl & Gouge...

Jake Niedling

>Dawn - are the bowls the same diameter and basic shape? Are you having the catch in the same place on the bowl. Also what size gouge are you using? The smaller the diameter of the bowl and the sharper the curve in the side wall to the bottom, there is more tendency to get a catch. Let's hear more details. Jake

Re: Mean piece of honey locust

#5

Re: Mean piece of honey locust

Dawn Adams

>Thanks Bill - do you mean roll toward the bowl or away from the bowl?

Re: Mean piece of honey locust

#6

Re: What is the size of bowl & Gouge...

Dawn Adams

>The bowl is 8" in diameter and 4 1/2" deep. I am using a 5/8" Ellsworth bowl gouge sharpened using one of his jigs.

Re: Mean piece of honey locust

#7

Re: Mean piece of honey locust

Bill Grumbine (Kutztown PA)

>Roll it towards the bowl Dawn, so it is more like a shear scrape. You aren't really going as far as a shear scrape, but you are lessening the aggressiveness of the gouge.

Bill

Re: Mean piece of honey locust

#8

Re: Mean piece of honey locust

Gary Evans Tallassee, TN

>Dawn,

The other thing about honey locust is that it is a much coarser grained wood than cherry. This will affect the cutting characteristics at least as much as the relative hardness. The sharper the tool, the better it should cut the locust.

Also, are you catching in an area of straight grain or wilder stuff?

Gary

Re: Mean piece of honey locust

#9

A smaller gouge

Jorge Castaneda~Downeast Maine

>Dawn,

A smaller gouge very sharp may be what you need. Locust is fiber-y and harder than cherry. Try a 3/8" or even a 1/4" if you have it, both very sharp and a very small bite rubbing the bevel.

Jorge

Re: Mean piece of honey locust

#10

Go to 3/8" bowl gouge........

Jake Niedling

>Dawn - I think I would go down to a 3/8" size bowl gouge if you have one. The main reason is that it will enable you to make the sweep from side to bottom easier without losing the bevel. This coupled with what Bill is saying should help avoid the catch.

Re: Mean piece of honey locust

#11

Re: Mean piece of honey locust

john lucas

>Dawn I would say either the shape of the bowl is different or your changing how you work with the gouge. I know honey locust is a lot harder than cherry but it usually cuts fine for me.

I would look at the area where your having the catch problems and then rotate it by hand while holding the gouge there. You may find that you have to rotate the flute one way or another to get it to ride the bevel. If your getting a catch then your coming off the bevel somehow. Quite often this is the area between the sides and the bottom of bowls with steeper sides. Long gently curving bowls rarely give people problems.