Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Dominic has a great article as well!

Posts

Dominic has a great article as well!

#1

Mike Stafford

Dominic has a great article as well!

Mike Stafford

>Dominic, I did not mean to overlook your article on the shop built bottle stopper chuck but I was just thumbing through the magazine and stopped when I saw a picture of a box. You know I am crazy about boxes. When I took a more leisurely stroll through the magazine I saw your article about the bottle stopper chuck. I think it is a great idea and one that even the most mechanically challenged of us might be able to duplicate. Good stuff, Dominic!

Re: Dominic has a great article as well!

#2

Re: Dominic has a great article as well!

Harvey Meyer in Atlanta

>I have to agree. Thanks Dom, that was a very good article and I have already made one and used it with great success. It actually cut my time by about one third just by having a better holding method than I was using. I'm working my way thru a large supply of Ruth's 9mm stoppers that I bought from her a few years ago. I had to shave one end of a 3/8 drill rod down to 23/64 to match the drill bit I use for the 9mm blanks. I hold the mandrel in a 3/8 collet chuck. Works great and I never would have thought of it. Thanks again.

Harvey

Re: Dominic has a great article as well!

#3

Thanks guys!

Dominic Greco in Richboro PA

>