Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Great article in Woodturning Design, John Lucas!

Posts

Great article in Woodturning Design, John Lucas!

#1

Mike Stafford

Great article in Woodturning Design, John Lucas!

Mike Stafford

>John Lucas has a wonderful article in the Winter 2008 edition of Woodturning Design magazine explaining how he does "ornamental turnings" using a router or high speed detail tool. I had been wanting to see some of the jigs and fixtures John uses.

Thanks a lot, John. A very well done article. I enjoyed it.

Re: Great article in Woodturning Design, John Lucas!

#2

Re: Great article in Woodturning Design, John Luca

john lucas

>Thanks Mike. I wish I had the time to really expand on the article. I think there are so many more things you can do with this technique. It's not as good as a true ornamental machine because the cutting action of the router in that direction isn't as clean. Ideally you need the cutting action like a shaper rather than the end of a narrow router cutter. You just don't get as clean a cut. Still it produces a nice pattern and is certainly fun to play with.

Re: Great article in Woodturning Design, John Lucas!

#3

Re: Great article in Woodturning Design, John Luca

Jerry Whitaker

>Now, if we could just get Eagle to write an article on how he does his pens..... I'm not holding my breath!

Re: Great article in Woodturning Design, John Lucas!

#4

Like the FBI says, follow the money

john lucas

>I make my money from writing the articles, Eagle makes his by selling pens and doesn't need to give away the secrets to the competition. I think that's perfectly understandable. He's put the R@D into figuring how to do this and probably doesn't need to give it away until he's upped the anti with a better product.

Re: Great article in Woodturning Design, John Lucas!

#5

Eaglesc has Written How-To Articles

jwoodwright

>Eaglesc has done many How-To Articles on the IAP Site. http://www.penturners.org/forum/portal.asp

I.E. Vacuum Sled for very small pieces, use of different materials, clamping jigs. Far too many to list. The "box" was left behind. Many of his designs were explained and then copied. No greater compliment than following his methods and achieving the same goal.

I am proud to call Eaglesc friend.

Re: Great article in Woodturning Design, John Lucas!

#6

Re: Great article in Woodturning Design, John Luca

Gordon Seto

>We don't expect Coke to reveal their formula, or Bush's baked beans their recipes. Why can't a woodturner keep something close to his vest for his intellectual property, especially when he is selling the products? Small guys should have the same right and respect as big corporations.

I am not advocating for not sharing informations, knowledge over the forums. But it is up to the individual who chooses to do so. I really appreciate those who share a boat load of information who shortened my learning curve.

Gordon

Re: Great article in Woodturning Design, John Lucas!

#7

Re: Great article in Woodturning Design, John Luca

Jerry Whitaker

>All said in jest....that is why I said I was not holding my breath. I don't blame him for not giving up secrets that generate dollars. In fact, I have something that I do that I will never post a picture of or share until the $$ stop flowing even though they are not big dollars. Keep the pictures coming Eaglesc. Your pens are a joy to look at.

Re: Great article in Woodturning Design, John Lucas!

#8

Ah common Jerry, please share :)

john lucas

>